Contents Welcome Need More Help? What's in the Box Inline Controls Wearing Your Headset Adjust the Headband Position the Boom Adjust the Boom Daily Use Headset Power Inline call control Adjust Your Headset Volume Mute a Call PC Configuration Troubleshooting Headset Support...
Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Blackwire 215/225 analog corded headset. Please refer to the safety instructions for important product safety information prior to installation or use of the product.
Wearing Your Headset Adjust the Headband Lengthen or shorten the band until it fits comfortably. The cushions should sit comfortably over the center of your ears. Position the Boom This headset can be worn on the left or right side. Rotate the boom to align with your mouth.
Daily Use Headset Power The analog headset is automatically powered on when it is plugged into the 3.5 mm jack of your computer, mobile phone or tablet.
Inline call control Press the answer/end button on the headset inline control to answer or end a call (mobile phone only). Adjust Your Headset Slide the volume control up on the headset inline control to increase listening volume. Volume Slide the volume control down on the headset inline control to decrease listening volume.
Mute a Call During a call, slide the mute button down on the headset inline control to mute the microphone. To turn mute off, slide the mute button back up.
PC Configuration Windows: For some Windows computers, a window may pop up when you first plug in your headset. Please select "Headset" from the options provided.
Troubleshooting Headset I cannot hear caller. Listening volume is too low. Press the volume up button on the headset. and/or ensure that the volume setting on your computer is set accurately. The analog headset is not set as the default audio device. Use the audio settings in your sound control panel/preferences to select your headset as the default audio device.
Page 12
• Under “Sound Playback”, change the default setting from your headset to your device choice. Supported Operating Systems: Windows Vista, Windows 7, Windows 8, 8.1, 10 • Go to Control Panel > Sound > Recording tab. • Highlight your device choice, select the Set Default button and click OK.