Command Introduction; Ip-Mac - TP-Link SafeStream TL-ER6020 User Manual

5.4 Command Introduction

TL-ER6020 provides a number of CLI commands for users to manage the Router and user information.
For better understanding, each command is followed by note which is the meaning of the command.
5.4.1 ip
The ip command is used to view or configure the IP address and subnet mask of the interfaces. View
command can be used in both User EXEC Mode and Privileged EXEC Mode while configuration
function can be only used in Privileged EXEC Mode.
TP-LINK > ip get lan
Lan Ip:
Lan Mask: 255.255.255.0
TP-LINK # ip set lan address 192.168.0.20
TP-LINK # ip set lan mask 255.255.0.0

ip-mac

5.4.2
The ip-mac command is used to view or configure the current IP-MAC Binding mode. View command
can be used in both User EXEC Mode and Privileged EXEC Mode while configuration function can be
only used in Privileged EXEC Mode. The IP-MAC Binding mode includes two types: normal mode and
restrict mode.
TP-LINK > ip-mac get mode
Ip-mac Bind Mode: normal
TP-LINK # ip-mac set mode restrict
192.168.0.1
-152-
Get the configuration
information of LAN port.
Set the LAN IP address of the
Router as 192.168.0.20.
Displaying Operation
succeeded! indicates the
operation is successful. It will
be prompted if an error
occurs.
Set the LAN subnet mask of
the Router as 255.255.0.0.
Get the current
binding mode.
Set the current
binding mode to
mode.
IP-MAC
IP-MAC
restrict