Double Vlan - D-Link xStack DGS-3426 User Manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch

Double VLAN

To enable or disable the double VLAN State settings click, L2 Features > VLAN > Double VLAN Settings, which will display
the following window.
Choose Enabled using the pull-down menu and click Apply. The user will be prompted with the following warning window.
Click OK to continue.
After being prompted with a success message, the user will be presented with this window to configure for Double VLANs.
Parameters shown in the previous window are explained below:
Parameter Description
Double VLAN Use the pull-down menu to enable or disable the Double VLAN function on this Switch. Enabling
State the Double VLAN will return all previous VLAN configurations to the factory default settings and
remove Static VLAN configurations from the GUI.
The VLAN ID number of this potential Service Provider VLAN.
SPVID
VLAN Name The name of the VLAN on the Switch.
TPID The tagged protocol ID of the corresponding VLAN that will be used in identification of this
potential Double VLAN, written in hex form.
The user may view configurations for a Double VLAN by clicking its corresponding
read-only window.
Figure 7- 9. Double VLAN State Settings
Figure 7- 10. Double VLAN Table
126
button, which will display the following