Table of Contents
Advertisement
Quick Links
Operating and Project Engineering Manual
M2Smart
M2Smart
Mobile HMI with functional safety according to DIN EN ISO 13849
Version: 2.08
© All rights reserved – ACD Elektronik GmbH
This document may not be reproduced or made available to third parties without permission.
Operating and Project Engineering Manual_M2Smart
®
®
HMI5/M2Smart
HMI10 and
®
®
Gateway i/M2Smart
®
HMI_System_V2.08_en
Gateway o
1 / 160
Advertisement
Table of Contents
Related Manuals for ACD M2Smart Gateway i
Summarization of Contents
1 Foreword
1.1 Purpose of the Document
Describes the document's objective and scope.
1.2 Target Group for Documentation
Identifies intended users and their qualifications.
1.3 Conditions for Target Groups
Lists required qualifications for different user roles.
1.4 Document Actuality
Information on checking the current version of the document.
1.5 Further Documentation
Guidance on accessing additional documentation.
1.6 Support and Manufacturer Address
Contact information for technical support and the manufacturer.
2 Legal Information and Warning Concept
2.1 Document Origin
States the original language and translation status.
2.2 Document Validity
Explains the applicability of instructions across different versions.
2.3 Copyright Information
Outlines rights reserved by the manufacturer.
2.4 Safety Instructions and Warning Concept
Explains symbols and warnings used in the manual.
4 Standards and Guidelines
4.1 Machinery Directive 2006/42/EC Information
Explains manual's structure alignment with Machinery Directive.
4.2 Functional Safety and Performance Level
Details functional safety and performance level determination.
4.3 Standards for Conformity Assessment
Lists standards for compliance with various directives.
5 Terms and Abbreviations
5.1 Abbreviations List
Lists common abbreviations and their meanings.
5.2 Key Terms
Defines key terms used in the manual.
6 M2Smart® HMI Systems Description
6.1 System Overview
Provides a general overview of the M2Smart HMI system components.
6.2 System Overview Scheme
Illustrates the functional overview of the M2Smart HMI system.
6.3 Device Overview
Shows physical overview of the HMI devices.
6.4 M2Smart® HMI System Condition Table
Details system conditions and Gateway outputs.
7 M2Smart® HMI Description
7.1 Commissioning and Handling
Instructions for initial setup and handling of HMI devices.
7.2 Switch On and Off
Steps for powering the HMI device on and off.
7.3 Idle Mode (Energy-Saving)
How to activate and the function of the energy-saving mode.
7.4 Status LEDs
Explains the meaning of the status LEDs on the HMI.
7.5 Emergency Power Supply
Information on the emergency power supply function.
7.6 WiFi/BT Communication
Details wireless communication capabilities.
7.7 RFID/NFC Reader
Information on the RFID/NFC reader functionality.
7.8 USB-C Interface
Description of the USB-C port on the HMI10.
7.9 Battery and Power Supply
Covers battery options and charging.
7.10 Keyboard and Keys
Describes the available buttons and their functions.
7.11 Retaining Strap Adjustment and Replacement
Instructions for adjusting and changing the retaining strap.
7.12 Software Information
Information on software documentation and support.
7.13 Open Source Software
Details about the use of open-source software components.
7.14 Technical Data
Provides detailed technical specifications for the devices.
7.15 Dimensions
Physical dimensions of the HMI devices.
8 M2Modules
8.1 Intended Use
Defines the intended application of M2Modules.
8.2 Warnings and Safety Instructions
Safety precautions for using M2Modules.
8.3 Cleaning and Care Instructions
Guidelines for cleaning modules and contacts.
8.4 Miscellaneous Information
General information, including WEEE disposal.
8.5 Individual Modules in Detail
Detailed descriptions of each module.
8.6 Regular Check of M2Not-Halt
Procedure for regular inspection of the M2Not-Halt module.
9 M2Smart® Gateway Description
9.1 Warnings and Safety Instructions
Safety precautions specific to the M2Smart Gateway.
9.2 M2Smart® Gateway i (In Cabinet)
Details of the Gateway installed in a cabinet.
9.3 M2Smart® Gateway o (Out of Cabinet)
Details of the Gateway installed outside a cabinet.
9.4 Transport and Storage
Guidelines for transporting and storing the Gateway.
9.5 Reset Procedure
Procedure for resetting the Gateway.
9.6 Resetting Settings
Steps to reset Gateway configuration settings.
10 Operation HMI with Gateway
10.1 Operational Requirements
Lists prerequisites for operating HMI with Gateway.
10.2 Establishing Connection
Steps for creating a secure connection.
10.3 Disconnecting the Connection
Procedure for disconnecting the HMI from the Gateway.
11 Example Circuit: Safety Control
11.1 Safety Control Requirements
Safety requirements for the control system.
11.2 Example Circuit Functions
Explains the functionality of example circuits.
12 Overview ACD HMIService/HMIConfig
12.1 ACD HMIService Application
Explains the ACD HMIService application.
12.2 ACD HMIConfig Application
Details the ACD HMIConfig application.
13 ACD HMIConfig Application
13.1 Starting the ACD HMIConfig App
Steps to launch the ACD HMIConfig application.
13.2 ACD HMIConfig Menus
Overview of the ACD HMIConfig application menus.
13.3 No M2Smart® Gateway Connected
Error screen when no Gateway is connected.
13.4 Application Overview
General overview screen of the ACD HMIConfig app.
13.5 Status Display
Various status messages and indicators.
13.6 Connection Settings
Adjusting various connection parameters.
13.7 Password Management
How to change the password for settings.
13.8 App Guard Functionality
Function to prevent app launch without secure connection.
13.9 Information Display
Displays hardware and software version information.
13.10 Possible Error Screens
Screens that appear when errors occur.
16 Troubleshooting and Diagnosis
16.1 M2Smart® HMI Troubleshooting
Troubleshooting specific to the M2Smart HMI.
16.2 M2Smart® Gateway i Troubleshooting
Troubleshooting the M2Smart Gateway i.
16.3 M2Smart® Gateway o Troubleshooting
Troubleshooting the M2Smart Gateway o.
17 Maintenance
17.1 M2Smart® HMI Maintenance
Maintenance activities for the M2Smart HMI.
17.2 M2Not-Halt Maintenance
Information on M2Not-Halt maintenance.
17.3 M2Smart® Gateway Maintenance
Information on M2Smart Gateway maintenance.
17.4 Cleaning and Care Instructions
Guidelines for cleaning and caring for devices.
19 Other Accessories
19.1 DS2Smart® HMI5 Accessory
Information about the DS2Smart HMI5 accessory.
19.2 DS2Smart® HMI5 Connection Set
Details of the connection set for DS2Smart HMI5.
19.3 DS2Battery Accessory
Information about the DS2Battery accessory.
19.4 DS2Battery Connection Set
Details of the connection set for DS2Battery.
19.5 M2Smart® HMI10/Active Mount Connection Set
Connection set for HMI10 and Active Mount.
19.6 M2Smart® HMI10 Mounts
Wall mounting options for HMI10.
19.7 Spare Battery
Information on the spare battery.
19.8 M2Smart® Display Protection Films
Available screen protectors for HMI devices.
19.9 Rod Antenna
Details about the rod antenna accessory.
19.10 External NFC Tag
External NFC tag accessory.
19.11 M2Smart® HMI Access Point
Accessory for connecting machines to wireless networks.
20 Further Information and Safety Instructions
20.1 M2Smart® HMI System Safety
General safety instructions for the HMI system.
20.2 M2Smart® HMI Safety
Safety instructions specific to the M2Smart HMI.
20.3 M2Smart® Gateway Safety
Safety instructions specific to the M2Smart Gateway.
20.4 Safety Parameters for HMI System
Lists safety parameters for various HMI system configurations.
20.5 Authorised Components
Lists approved hardware and software versions.
23 Appendix
23.1 Documenting Safety Parameters
Template for documenting safety parameter changes.
24 Directories
24.1 List of Illustrations
List of all illustrations in the document.
24.2 List of Tables
List of all tables in the document.
Need help?
Do you have a question about the M2Smart Gateway i and is the answer not in the manual?
Questions and answers