Advertisement
Quick Links
Ceiling Fan Instruction Book
FSL124W/FSL124M; FSL1244W/FSL1244M/FSL1244WR/
Models:
FSL1244MR; FSL1243W/FSL1243M/FSL1243WR/FSL1243MR
DESCRIPTION
Motor assembly
Instruction manual
Screw kit
Balancing kit
Hanging bracket
Wall control kit
LINK AC SERIES
Blades
QUANTITY
1
1
1
1
1
1
4
Advertisement
Related Manuals for Martec FSL1244W
Summary of Contents for Martec FSL1244W
- Page 1 LINK AC SERIES Ceiling Fan Instruction Book FSL124W/FSL124M; FSL1244W/FSL1244M/FSL1244WR/ Models: FSL1244MR; FSL1243W/FSL1243M/FSL1243WR/FSL1243MR DESCRIPTION QUANTITY Motor assembly Instruction manual Screw kit Balancing kit Hanging bracket Wall control kit Blades...
- Page 2 ONLY install the wall controller kit that comes supplied by Martec Pty Ltd within package. DO NOT control operation of fan and light with any other wall control than what was approved by Martec Pty Ltd and supplied within this package, as this will void warranty.
- Page 3 With Light model Hanging bracket ______ ______ Canopy ______ Downrod assembly ______ Yoke cover ______ Top housing Blade Motor assembly ______ With LED tricolour With 2*E27 holders light kit integrated light kit ______ PC shade www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 3...
- Page 4 Without Light model Hanging bracket ______ ______ Canopy ______ Downrod assembly ______ Yoke cover ______ Top housing Blade Motor assembly ______ Metal cover ______ www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 4...
-
Page 5: How To Assemble
Secure the hanger bracket to ceiling beam or a suitable piece of timber inser ed between the ceiling beams. Martec Pty Ltd recommends the bracket to be a ached with two long screws as supplied within the package. There is a ball seat rubber cover need to be pressed into the bracket.(See Fig.1.) Place circular shockproof gasket above the hanger bracket. - Page 6 www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 6...
- Page 7 HOW TO INSTALL/REMOVE THE PC SHADE (Version with lights) Align the shade as shown in the figure below, and place the PC ( Plastic) shade. Spin it clockwise. To remove turn the shade anti-clockwise If the fan is with LED tricolour light If the fan is with E27 light model (FSL1244) model (FSL1243) www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au...
- Page 8 HOW TO INSTALL/REMOVE THE METAL COVER (Version without lights) Align the metal cover with the central spindle extended from motor as shown in the figure below, and spin it clockwise. To remove turn the shade anti-clockwise If the fan is without light model (FSL124) Tricolour CCT (Colour changeable temperature) Please make sure the light switch is off before changing the colour temperature.
- Page 9 Page 9 www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au...
- Page 10 Page 10 www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au...
- Page 11 With/Without Light Page 11 www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au...
- Page 12 1.INSTALLING RECEIVER IN CEILING FAN A. Safety precautions: WARNING: HIGH VOLTAGE! Disconnect power by removing fuse or switching off circuit breaker. Do not use with solid state fans. Electrical wire must meet all local and national electrical code requirements. B. Electrical rating: 220v-240V 50/60Hz 3.5A MAX.
- Page 13 2.OPERATING TRANSMITTER: A. Install 3 volt battery. (To prevent damage to transmitter, remove the battery if not used for a long time.) B. Store the transmitter away from excessive heat or humidity. C. Operating the buttons on the panel of the transmitter. HI key -for fan high speed.
Need help?
Do you have a question about the FSL1244W and is the answer not in the manual?
Questions and answers