Related Manuals for Turbosound TQ14M
Summarization of Contents
Welcome
Unpacking the Loudspeaker
Check for damage, notify supplier if found, retain packaging for returns.
About this Quick Start Guide
Describes TQ12M and TQ14M details. Only use with these components.
General Safety
Installation by qualified personnel, observe regulations. Contact dealer if parts missing.
System Requirements
TQ12M/TQ14M are bi-amp 2-way speakers, require specific amplifier/DSP.
System Cabling Requirements
BI-AMP Mode
Set switch to BI-AMP, cabinets wired (1+/-=LF, 2+/-=HF). Use specific output patching.
PASSIVE Mode
Set switch to PASSIVE. Monitors wired (1+/-=FR, 2+/-=link). Output patching options.
Connections
Installation
Speaker has four feet for flat surface placement.
Pole Mount
35 mm hole for pole mounting on subwoofers or tripod stands.
Lake Preset Overlays and Application Notes
Lake XP signal flow
Diagram shows signal path through GAIN, DELAY, XOVER, OPTIMIZER stages to DSP OUTPUT.
Output Configuration
EQ STRATEGY
Stage monitors have a 2-band EQ (BLEQ) for LF/HF level control and crossover points.
Other important information
EN Important information
Provides details on product registration, troubleshooting, and power connections.
Need help?
Do you have a question about the TQ14M and is the answer not in the manual?
Questions and answers