Related Manuals for TMA TM3
Summarization of Contents
User Safety
General Safety Precautions
Covers qualified personnel, reading manual, grounding, and UV radiation hazards.
Power Supply Requirements
Specifies 220-230V 50Hz mains and grounding necessity for safe operation.
Installation and Operation Instructions
Product Features Overview
Highlights electronic control, alarms, counters, and continuous disinfection capability.
Design Enhancements
Details quartz sleeve guides, sediment reduction, and durable amalgamate lamps.
Introduction and Applications
Handling and Transport
Protect from shocks, transport horizontally, and understand warranty implications of noncompliance.
UV Sterilization Benefits
Explains UV disinfection as reliable, simple, and its applications in various water types.
Operational Flow Guidelines
No minimum flow required; higher flow reduces dosage efficiency.
Technical Specifications (TM0-TM5)
Model Specific Data
Comprehensive table of dimensions, connections, and UV lamp details for models TMO to TM5.
Electrical Enclosure Details
Specifications for material, safety class, dimensions, and features of electrical enclosures.
Technical Specifications (TM6-TM14)
Model Specific Data (TM6-TM14)
Detailed technical specifications for models TM6 through TM14.
Electrical Enclosure Specifications
Dimensions and features of electrical enclosures for TM6-TM14 models.
Description and Connections (TMO,TM1)
Product Components and Assembly
Describes chamber, sleeves, lamps, O-rings, and enclosure contents.
Alarm Signal and Solenoid Valve
How to connect alarm signals and solenoid valves for TMO,TM1 models.
Remote Control and Connections (TM2-TM14)
Remote ON/OFF Switch
Instructions for connecting a remote switch for ON/OFF control on TMO,TM1 and TM2-TM14 models.
Alarm and Solenoid Valve Wiring
Guides for connecting alarm signals and solenoid valves for TM2-TM14 models.
Remote ON/OFF Switch (TM2-TM14)
Switch Terminal Connections
Details connecting remote switches to terminals 3 & 4 for TM2-TM14 models.
Connection Diagrams
Illustrates solenoid valve, alarm, and external connections for TM2 model.
Chamber Assembly Instructions
Vertical and Horizontal Mounting
Guidance on assembling the chamber in vertical or horizontal positions, including temperature range and air gap prevention.
Installation Best Practices
Recommendations for by-pass installation, avoiding strain, and water quality requirements.
Quartz Sleeves Assembly
Sleeve Insertion and Sealing
Step-by-step guide for inserting quartz sleeves and tightening the muff for a proper seal.
Critical Handling Warnings
Emphasizes extreme care due to sleeve fragility and warns against using incorrect tools for tightening.
UV Lamps and Electrical Enclosure Assembly
Enclosure Mounting and Lamp Installation
Instructions for mounting the electrical enclosure and installing UV lamps.
Lamp Handling Safety
Crucial warning to wear cotton gloves when mounting UV lamps to prevent breakage.
Lamp Hood, Power Up, and Safety Alerts
Final Assembly and Power On
Steps for placing the lamp hood, connecting power, and turning on the device.
Operational Safety Warnings
Alerts regarding lamp faults, ballast damage from improper power-up, and solenoid valve safety connections.
Temperature Sensor Mounting (TM3-TM14)
Sensor Installation Procedure
Steps for connecting the temperature sensor cord and installing strain relief.
Mounting Caution and Operation
Warning about improper sensor mounting causing shorts and details on radiator temperature control.
Alarms Description (TMO,TM1)
Alarm Indicators and Causes
Explains display indications and causes for lamp life, damage, and power loss alarms.
Troubleshooting Alarm Conditions
Provides solutions for various alarm states, including silencing sound alarms and checking power.
Counter Reset and Indicator Lights
Alarm Counter Reset Procedure
Detailed steps to reset the work time counter after UV lamp replacement.
Indicator Light Meanings
Explains the status indicated by Alarm (Red) and Power (Green) lights and corresponding troubleshooting actions.
Maintenance Procedures
Safety and Quartz Sleeve Care
UV safety, checking/cleaning quartz sleeves, and mandatory o-ring replacement.
Operational Best Practices
Continuous operation, filter use, water quality, sizing, and lamp warm-up times.
Lamp Replacement and Warnings
Red light for replacement, voltage surge damage risk, and bioassay sampling.
Maintenance and Protection Details
Lamp and Ballast Protection
Risks from faulty lamps, humidity damage, and voltage surges affecting ballast.
Control Cabinet Protection Devices
Lists specific protection devices (Fuse, MCB) used in control cabinets for different models.
UV Lamp and Quartz Sleeve Replacement
UV Lamp Replacement Guide
Step-by-step instructions for replacing UV lamps, including critical warnings.
Quartz Sleeve Handling and Replacement
Procedures for cleaning, replacing quartz sleeves, and mandatory o-ring replacement.
Troubleshooting and Transport
Common Problems and Solutions
Addresses issues like burned lamps, water inside sleeves, and their resolutions.
Shipping and Handling
Guidelines for disassembling and packing sterilizers for safe transport.
Diagram and Dimensions
General Dimension Overview
Diagrams and a table showing general dimensions for TMO-TM14 models.
Model-Specific Dimensions Table
Detailed table listing X, Y1, Z, L, L1, DN, D, a, b, c dimensions for each model.
Spare Parts List and Diagrams
Sterilizer Component Diagram
Illustrates the orientation of various components within the sterilizer.
Model-Based Parts Quantity
Table detailing the quantity of spare parts required for each model (TMO-TM14).
Hygienic Certificate Information
Certificate Issuance and Content
Details of the National Institute of Public Health certificate and product description.
Hygienic Acceptance Conditions
Conditions for hygienic compliance, including water quality and user manual.
Certificate Validity and Expiry
Information on certificate correction, cancellation, and its expiry date.
Declaration of Conformity
Product and Manufacturer Details
Identifies the manufacturer, product models, and production site.
Compliance Standards and Use
Lists reference directives, product classification, and scope of use for UV disinfection.
Declaration Statement and Lot
Statement of compliance with good engineering practice and identification of the declared lot.
Graphical Mounting Instructions
Electrical Enclosure Mounting Options
Illustrates different mounting variants for the electrical enclosure.
Forbidden Mounting Method
Visual warning against an incorrect method of mounting.
TM Sterilizer Assembly Steps
Assembly Sequence Overview
A series of numbered images showing the assembly process.
Critical Assembly Steps and Warnings
Highlights key steps like O-ring handling and includes warnings for careful assembly.
Warranty Information
Obtaining Warranty Service
Essential requirements for warranty claims, including purchase documents and proper installation.
Warranty Coverage and Duration
Details on repair/replacement policies, warranty periods for chamber and electrical parts.
Warranty Conditions and Exclusions
Covers chamber warranty conditions, water quality, and specific exclusions for AISI 304/316.
Customer Rights and Replacement
Outlines purchaser rights for replacement in case of irreparable defects or repeated repairs.
Warranty Limitations and Liability
Definition of 'Repair' and Exclusions
Clarifies what 'repair' includes/excludes and lists general warranty exclusions.
Manufacturer Liability Limitations
Specifies conditions releasing the manufacturer from liability and limitations on financial loss.
Warranty Claim Requirements
Covers proof of purchase, manufacturer markings, and the scope of warranty claims.
Warranty and Post-Warranty Repairs Record
Repair Log Table
A table for logging details of warranty and post-warranty repairs.
Need help?
Do you have a question about the TM3 and is the answer not in the manual?
Questions and answers