Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for T Scale QHC-15
Summarization of Contents
Introduction
General Overview
Overview of the AHC_QHC series counting scales features.
Installation
Unpacking and Component Check
Instructions for unpacking the scale and checking components.
Physical Installation and Leveling
Steps for physically installing the scale and ensuring it is level.
Power Connection and Battery Operation
How to connect power, charge, and maintain the battery.
Keyboard and Display
Key Functions
Describes the functionality of various keys on the scale.
Display Indicators and Status
Explains the meaning of different indicators on the scale's display.
Operation
Initial Setup and Basic Operations
Covers initial startup, power, zeroing, and taring operations.
Parts Counting Functionality
Detailed guide on using the parts counting function.
Check Weighing and Limits
How to set and use high/low limits for weighing checks.
Accumulation and Memory Management
Procedures for accumulating, recalling, and clearing data.
Power Auto-Off and Backlight Settings
Configuration of power saving and display backlight.
Unit Weight Storage and Conversion
Storing, recalling unit weights and unit conversion.
Printing Functionality
Instructions for enabling and using the printing function.
Parameters
Parameter Blocks and Settings
Details of various parameter settings and their functions.
Capacity and Other Settings
How to set scale capacity and other operational parameters.
Calibration
Linear Calibration Procedure
Step-by-step guide for linear calibration of the scale.
Normal Calibration Procedure
Steps for performing normal calibration on the scale.
RS-232 Protocol
RS-232 Specifications and Connector
Technical specs and connector details for RS-232 interface.
Continuous Output and Control Commands
Format of continuous data output and scale control commands.
Print Format Examples
Examples of different print formats (Receipt and Label).
Error Codes
Maximum load exceeded
Indicates the maximum load capacity has been exceeded.
Zero setting error
Error related to the zero setting process.
Key board error
Indicates an issue with the scale's keypad.
A/D value out of range
Error when the analog-to-digital converter value is out of range.
Unstable reading
Indicates an unstable or fluctuating weight reading.
Tare out of range
Error when the tare function is out of its allowed range.
Calibration error
Indicates an error occurred during calibration.
Battery low
Warning that the battery charge is critically low.
Specifications
Technical Specifications
Detailed technical specifications for AHC and QHC models.
Physical Dimensions
Physical dimensions of the AHC and QHC models.
Need help?
Do you have a question about the QHC-15 and is the answer not in the manual?
Questions and answers