Related Manuals for Baoli KBE18
Summarization of Contents
I. Parts Name and Function
Liquid Crystal Display
Explains the functions and indicators of the liquid crystal display unit.
Controls and Switches
Describes the steering wheel, accelerator pedal, directional switch lever, and other controls.
II. Safety Operation
Safety Operation Information
Covers operational training, clothing, rules, and workplace safety.
Driving Information
Provides essential information for safe driving practices.
Operation Information
Guidelines for safe operation, including load handling.
After Working Information
Procedures to follow after completing work operations.
III. Driving and Operation
Preparation for Start
Steps to perform before starting the forklift operation.
Driving Procedures
Detailed instructions on how to drive the forklift.
Stacking Operation
Detailed procedure for safely stacking loads.
Picking Operation
Step-by-step guide for safely picking up loads.
IV. Battery and Charger
Battery Handling Precautions
Essential safety precautions for handling forklift batteries correctly.
Charging Precautions
Safety guidelines to follow when charging the forklift battery.
Charging Procedures
General requirements for charging the forklift battery.
Battery Exchanging
Procedures and precautions for safely exchanging forklift batteries.
V. Inspection Prior to Operation
Pre-Operation Inspection Points
Lists the specific check points and their corresponding contents for pre-operation inspection.
Inspection Procedures
Detailed steps and methods for performing pre-operation inspections.
VII. Periodic Servicing
Maintenance Precautions
General precautions to be taken during forklift maintenance.
Weekly (50-Hour) Servicing
Scheduled maintenance tasks to be performed weekly or every 50 hours.
Monthly (200-Hour) Servicing
Scheduled maintenance tasks for monthly or 200-hour intervals.
Lubrication and Oil Recommendations
Identifies lubrication points and recommends specific oils for the forklift.
Three-Month (600-Hour) Servicing
Maintenance tasks for every three months or 600 hours of operation.
Semiannual (1200-Hour) Servicing
Maintenance tasks for every six months or 1200 hours of operation.
Parts Replacement Guidance
Instructions and procedures for replacing common forklift parts.
Need help?
Do you have a question about the KBE18 and is the answer not in the manual?
Questions and answers