Safe Operation; Emission Control - Echo ES-210 - SERIAL NUMBER 07001001-07999999 Operator's Manual

6

SAFE OPERATION

Determine Operation Area
• Review area to be cleared. Look for potential hazards
such as stones or metal objects.
• Spectators and fellow workers must be warned, and
children and animals prevented from coming nearer
than 15 m (50 ft.) while the blower is in use.
• Take wind conditions into account: avoid open doors
and windows.
• Provide all operators of this equipment with the
Operator's Manual and instructions for safe operation.
• Do not point blower at people or animals.
• Start unit on ground with throttle at idle. Check that
blower pipe is not blocked by the ground or by any
objects.
WARNING
Do not operate this product indoors or in inad-
equately ventilated areas. Engine exhaust contains
poisonous emissions and can cause serious injury or
death.
Keep A Firm Grip
• Hold handles with fingers together encircling handles.
E C
MISSION ONTROL
EPA Phase 2
The emission control system for these engines are EM (Engine Modification).
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY, information on label varies by engine
FAMILY).
The 300 hour emission durability period is the time span selected by the manufacturer certifying the engine emis-
sions output meets applicable emissions regulations, provided that approved maintenance procedures are followed
as listed in the Maintenance Section of this manual.
DANGER
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 3EHXS.0214EB DISPLACEMENT: 21.2 cc
EMISSION COMPLIANCE PERIOD: 300 Hours
THIS ENGINE MEETS U.S. EPA PH 2 EMISSION REGULATIONS
FOR SMALL NONROAD ENGINES. REFER TO OWNER'S
MANUAL FOR MAINTENANCE SPECIFICATIONS AND
ADJUSTMENTS.
PRODUCT EMISSION DURABILITY
Keep A Solid Stance
• Maintain footing and balance at all times. Do not
stand on slippery, uneven or unstable surfaces. Do
not work in odd positions or on ladders.
• Do not perform Maintenance or Assembly procedures
with engine running.
Noise Control
• Follow local noise regulations on sound levels and
hours of operations. Use only during appropriate
hours.
• Never use a higher speed setting then necessary to
perform a task. The higher the engine speed the louder
the blower noise.
• Be a good neighbor.
Avoid Hot Surfaces
• During operation, the muffler or catalytic muffler and
surrounding cover may become extremely hot. Avoid
contact during and immediately after operation.
Always keep exhaust area clear of flammable debris.
Allow the engine and muffler to completely cool before
performing any maintenance activity.