Echo ES-255 SHRED ‘N’ VAC Operator's Manual

Echo ES-255 SHRED ‘N’ VAC Operator's Manual

Advertisement

Quick Links

X7722271404 / X772000164
SHRED 'N' VAC
Operator's Manual
The muffler or catalytic muffler and surrounding cover may become extremely hot.
Always keep clear of exhaust and muffler area, otherwise serious personal injury may
occur.
The engine exhaust from this product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
Users of this equipment risk injury to themselves and others if the unit is used
improperly and/or safety precautions are not followed. ECHO provides an operator's
manual. It must be read and understood for proper and safe operation. Failure to do so
could result in serious injury.
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time
of publication, but are subject to change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
X7501180708
© 5/2015 ECHO Inc.
ES-255
Burn Hazard
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES-255 SHRED ‘N’ VAC and is the answer not in the manual?

Questions and answers

Summary of Contents for Echo ES-255 SHRED ‘N’ VAC

  • Page 1 Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual. It must be read and understood for proper and safe operation. Failure to do so could result in serious injury.
  • Page 2: Table Of Contents

    The Operator’s Manual ........................ 3 Servicing information ......................... 3 Parts/Serial Number........................3 Service ............................3 Echo Consumer Product Support ....................3 Product Registration ........................3 Additional or Replacement Manuals .................... 3 Safety..............................4 Manual Safety Symbols and Important Information ..............4 International Symbols ........................
  • Page 3: Introduction

    Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required.
  • Page 4: Safety

    Note: This enclosed message provides tips for use, care and maintenance of the unit. CIRCLE AND SLASH SYMBOL This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury. X7501180708 © 5/2015 ECHO Inc.
  • Page 5: International Symbols

    Choke Control COLD START Choke Control DO NOT allow Wear slip Position “RUN” Position flames or resistant (Choke (Choke Open) sparks near fuel footwear Closed) Keep bystanders and helpers away 15 m (50 ft.). X7501180708 © 5/2015 ECHO Inc.
  • Page 6: Personal Condition And Safety Equipment

    Hearing/Ear Protection ECHO recommends wearing hearing protection whenever unit is used. Breathing Protection Operators who are sensitive to dust or other common airborne allergens may need to wear a dust mask to prevent inhaling these materials while operating unit.
  • Page 7 ECHO does not recommend the use of this machine by anyone who has a pacemaker.
  • Page 8 • Avoid blowing debris towards people, pets, open windows, or vehicles when using unit. • Review area to be cleared. Look for potential hazards such as stones or metal objects. Keep a Firm Grip • Hold the handle in one hand, with thumb and fingers encircling the handle. X7501180708 © 5/2015 ECHO Inc.
  • Page 9: Equipment

    Use only ECHO attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual.
  • Page 10: Emission Control (Exhaust / Evaporative)

    The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. X7501180708 © 5/2015 ECHO Inc.
  • Page 11: Description

    Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.
  • Page 12 14. VACUUM TUBE - Sucks in materials to be shredded. 15. DEBRIS BAG - Collects shredded material 16. FAN/SHREDDER BLADE COVER - Covers blade area and activates safety interlock switch when closed. Engine will not run if safety switch is not activated. X7501180708 © 5/2015 ECHO Inc.
  • Page 13: Contents

    The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
  • Page 14: Assembly

    2. Release locking ring (C) with a coin or screwdriver, and rotate so that lock symbol (A) is at top of ring. 3. Align locking ribs (E) on main blower pipe with recesses (D) in locking ring, and slide main blower pipe into locking ring. X7501180708 © 5/2015 ECHO Inc.
  • Page 15: Remove Blower Pipes

    5 & 6. Blower Pipe Remove Blower Pipes 1. Release locking ring (C) with a coin or screwdriver, and rotate ring so that lock symbol (A) is at top of ring. 2. Remove pipes from locking ring. X7501180708 © 5/2015 ECHO Inc.
  • Page 16: Vacuum/Shredding Application

    2. Release locking ring (C) with a coin or screwdriver, and rotate so that lock symbol (A) is at top of ring. 3. Align locking ribs (L) on elbow with recesses (D) in locking ring, and slide elbow into locking ring. X7501180708 © 5/2015 ECHO Inc.
  • Page 17: Operation

    Metal cutters can also create sparks if the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention requirements. X7501180708 © 5/2015 ECHO Inc.
  • Page 18: Fuel

    ES-255 Fuel Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement.
  • Page 19: Starting Cold Engine

    Move stop switch (A) away from the STOP position. 2. Throttle Position Lever Move throttle position lever (B) midway between idle and full throttle positions. 3. Choke Move choke (C) to COLD START ( ) (closed) position. X7501180708 © 5/2015 ECHO Inc.
  • Page 20: Starting Warm Engine

    The starting procedure is the same as Cold Start except DO NOT close the choke. 1. Stop Switch Move stop switch (A) away from the STOP position. 2. Throttle Position Lever Move throttle position lever (B) midway between idle and full throttle positions. X7501180708 © 5/2015 ECHO Inc.
  • Page 21: Stopping Engine

    Move stop switch (A) to STOP position. If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using unit again. Operating Blower Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas.
  • Page 22 Minimize dust by using blower at lower speeds. Keep debris on your property. Be Smart - be a good neighbor. Two-hand Operation For added comfort and control, grip throttle control handle with left hand, and lower handle/stand with right hand. X7501180708 © 5/2015 ECHO Inc.
  • Page 23: Shred ' N' Vac Operation

    Vacuum tube difficult to install or Tube/housing fit tight. Apply small amount of soapy remove from unit water to end of tube to ease assembly or removal. Turns tube 1/4 turn to loosen for removal. X7501180708 © 5/2015 ECHO Inc.
  • Page 24: Maintenance

    If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded.
  • Page 25: Air Filter

    When servicing model year 2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part. X7501180708 © 5/2015 ECHO Inc.
  • Page 26: Spark Plug

    Removal of cooling passage blockages or cleaning of cooling fins is considered “Normal Maintenance.” Any failure attributed to lack of maintenance is not warranted. Cleaning Grill 1. Brush accumulated debris from crankcase intake grill above the fuel tank. X7501180708 © 5/2015 ECHO Inc.
  • Page 27: Exhaust System

    1. Remove spark plug lead from spark plug, and remove engine cover. 2. Place piston at top dead center. Remove muffler (A) and heat shield (B). 3. Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port. X7501180708 © 5/2015 ECHO Inc.
  • Page 28: Carburetor Adjustment

    This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.
  • Page 29: Shredder Blade

    Do not operate SHRED ‘N’ VAC ® if shredder blade is damaged or broken. Return unit to Echo Dealer for service. 3. Install vacuum tube. Refer to “Install Vacuum Tube and Bag Assembly” in assembly section for correct assembly procedures.
  • Page 30: Troubleshooting

    Fuel strainer clogged Clean or replace Fuel at carburetor No fuel at carburetor Fuel line clogged Clean or replace Carburetor See your Echo dealer No fuel at cylinder Carburetor See your Echo dealer Open choke Fuel at cylinder Muffler wet with fuel...
  • Page 31: Storage

    9. Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston reaches the top of its travel and leave it there. 10. Install the spark plug (do not connect ignition cable). 11. Remove blower pipe assembly from unit. X7501180708 © 5/2015 ECHO Inc.
  • Page 32: Specifications

    Spark Plug NGK BPMR-8Y (Gap 0.65 mm (0.026 in.) Fuel Mixed (Gasoline and Two-stroke Oil) 50 : 1 Power Blend X or ECHO Red Armor ® ISO-L-EGD (ISO/CD 13738) and J.A.S.O. Fuel/Oil Ratio M345- FD, two-stroke, air-cooled engine oil. Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl Gasoline alcohol or 15% MTBE.
  • Page 33: Warranty Statements

    Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty. • ECHO’s Rapid Loader String Head carries a lifetime warranty on the line locking system, parts only; no labor. Refer to your operator’s manual for string head installation and maintenance instructions.
  • Page 34 10% ethanol (grain alcohol) or 15% MTBE (methyl/tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator’s manual. engine speeds as listed in your operator’s manual.
  • Page 35: Product Registration

    Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
  • Page 36: Notes

    NOTES ES-255 NOTES X7501180708 © 5/2015 ECHO Inc.
  • Page 37 ES-255 NOTES X7501180708 © 5/2015 ECHO Inc.
  • Page 38 NOTES ES-255 X7501180708 © 5/2015 ECHO Inc.
  • Page 39 ES-255 NOTES X7501180708 © 5/2015 ECHO Inc.
  • Page 40 P07213001001/P07213999999...

Table of Contents