VINCENT SV-238MK Instructions For Use Manual page 33

CONNECTION OF TWO ADDITIONAL
MAIN AMPLIFIER CHANNELS VIA RCA OR XLR
You only need the sockets "PRE OUTPUT" (9) if you want to use one or more separate main amplifier(s)
to supply additional loudspeakers. This makes sense if you intend to use two more loudspeakers for ste-
reo music playback, for example in a separate zone (another room of your home). These loudspeakers
are then connected to the speaker outputs of the additional amplifier(s). The amplifier output connections
"PRE OUTPUT" (9) must be connected with the input connectors of the main amplifier, in most cases label-
led "INPUT", "POWER AMP IN" or "MAIN INPUT". Two main amplifier channels can be connected via
RCA cables.
SV-238MK
Two more main amplifier channels can be connected via XLR cables.
SV-238MK
Both outputs reproduce the same stereo music signal of the currently selected source. Instead of the stereo
main amplifier used here two mono main amplifiers can be utilized.
RCA connection
XLR connection
Stereo main amplifier
INPUT
Stereo main amplifier
INPUT
Vincent
33