Table of Contents
Related Manuals for Fein WSB 14-125 T
Summarization of Contents
3. Electrical Function Checks
3.1. Basic Function Check
Verifies self-start lock and idling speed for electrical safety.
3.2. Extensive Function Check 1
Troubleshooting steps for motor not starting up issues.
3.3. Extensive Function Check 2
Troubleshooting for motor switching off, speed fluctuations, and weak performance.
3.4. Connection Line
Instructions for proper connection of stranded wires and ribbon cables.
3.5. Connection Diagram
Electrical wiring schematic for WSB 10 and WSB 14 models.
3.6. Safety Test
Procedure for conducting electrical safety tests as per VDE 0701 standard.
4. Dismantling the Grinder
4.1. Preparation
Essential steps to prepare the grinder before disassembly.
4.2. Removing Flange and Safety Hood
Detailed instructions for removing the flange and safety hood components.
4.3. Removing Motor Housing and Cable
Guide to safely detach the motor housing and its associated cable.
4.4. Bearing Plate, Transmission Housing, Carbon Holder
Steps for removing bearing plate, transmission housing, and carbon holders.
4.5. Disconnecting Armature / Field Magnet Unit
Procedure for separating the armature from the field magnet unit.
4.6. Removing Armature
Method for carefully removing the armature from its housing.
4.7. Dismantling Electronics
Instructions for disassembling and removing electronic components.
4.8. Dismantling Switch Module
Steps to remove and disassemble the switch module.
4.9. Taking Apart Armature
Process for disassembling the armature, including pressing components.
4.10. Drive Shaft
Instructions for handling and removing the drive shaft assembly.
4.11. Transmission Housing
Procedures for removing the transmission housing and its parts.
5. Assembly
5.1. Armature
Steps for assembling the armature with its components.
5.2. Transmission Housing
Guide to assembling the transmission housing and its parts.
5.3. Fitting Clamping Lever
Instructions for fitting the quick-release clamping lever.
5.4. Armature / Transmission Housing
Procedure for joining the assembled armature and transmission housing.
5.5. Fitting Switch Module
Steps to install the switch module into the unit.
5.6. Fitting Switch Cover
Instructions for attaching the front and back switch covers.
5.7. Fitting Electronics
Guide for installing the electronic control unit.
5.8. Connecting Electronics
How to connect the wiring harness to the electronics.
5.9. Armature / Field Magnet Unit
Procedure for assembling the armature into the field magnet unit.
5.10. Carbon Holder / Carbon Brushes, Drive Shaft
Steps to install carbon holders, brushes, and connect the drive shaft.
5.11. Drive Shaft
Instructions for assembling the drive shaft assembly.
5.12. Bearing Plate
Guide to fitting the bearing plate and checking backlash.
5.13. Motor Housing
Procedure for attaching and securing the motor housing.
5.14. Safety Hood
Steps for fitting the safety hood and associated components.
6. Tools
6.1. General Tools
List of standard tools required for maintenance and repair.
6.2. Special Tools
List of specialized tools with part numbers for specific tasks.
6.3. Types / Quantities of Grease
Information on recommended grease types and application quantities.
6.4. Adhesives, Sealants and Auxiliary Substances
Details on adhesives and sealants for secure assembly.
Need help?
Do you have a question about the WSB 14-125 T and is the answer not in the manual?
Questions and answers