Table of Contents
Advertisement
Quick Links
Halo
Chlorinator
®
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment
by the jurisdiction in which the product will be installed where such state or local requirements exist. The maintainer must be a
professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions in this manual
can be followed exactly. Before installing this product, read and follow all warning notices and instructions that accompany this
product. Failure to follow warning notices and instructions may result in property damage, personal injury, or death. Improper
installation and/or operation may void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property damage,
or death.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use
of this product. This information should be given to the owner/operator of this equipment.
Installation and Operation Manual
WARNING
Advertisement
Table of Contents
Related Manuals for Astralpool Halo Chlor 25
Summarization of Contents
System Overview
Contents of this Kit
Details the components included in the chlorinator kit for initial setup.
View of the Base of the Unit
Provides a visual representation of the base of the Halo Chlorinator unit and its ports.
Installation
Mounting the Controller
Instructions for physically mounting the Halo Chlorinator controller unit.
Pool Plumbing
Guidance on connecting the Halo Chlorinator to the pool's plumbing system.
Power Connections
Details on how to safely connect the Halo Chlorinator to a power source.
Other Connections
Information on connecting other devices or systems to the Halo Chlorinator.
General Operation and Pool Chemistry
Cyanuric Acid
Discusses the recommended levels and impact of cyanuric acid on chlorine readings.
Chlorine Level/ORP
Explains how to set and maintain desired chlorine levels using the chlorinator.
pH Level
Provides recommended pH ranges for different pool types for optimal operation.
Total Alkalinity
Details the recommended range for total alkalinity in pool water.
Salt Level
Advises on recommended salt levels and how to maintain them.
Ai Mode
Explains the automatic intelligent mode for pump speed and sanitisation.
Introduction to the Chlorinator Touchscreen
An introduction to navigating and using the chlorinator's touchscreen interface.
Navigation Buttons
Describes the function of various buttons on the chlorinator's interface for control.
Settings Screen
Details how to access and use the settings screen for adjustments like chlorine output.
Settings Buttons
Explains how to adjust time, date, and access device information via settings.
Timers Screen
How to set and manage equipment timers for pump and lighting schedules.
Other Equipment
How to access controls for additional connected equipment like heaters or lights.
Favourites
Describes how to set up and use custom 'favourite' modes for pool and spa operations.
Maintenance Screen
Guides users through maintenance tasks like sanitising, backwashing, and sensor calibration.
Introduction to the Install Screen
An overview of the install screen for initial configuration and app setup.
Mobile Access
Manages Bluetooth and app pairing for remote control and setup.
Connect To The Internet
Enables internet connectivity for software updates and remote operation.
Setup Required to Use the Halo ChlorGo App
Step-by-step guide for installing and configuring the Halo ChlorGo mobile application.
Chlorinator Configuration and Setup
Connecting Other Devices to a Halo Chlorinator
Details how to connect external devices like heaters, sensors, and pumps to the chlorinator.
Halo pH Doser
Information on connecting a pH Doser unit to the chlorinator.
Halo LITE2 and Halo LITE4
Instructions for connecting Halo LITE lighting systems wirelessly.
Halo Hub and Halo Xpand
Details on connecting Halo Hub and Xpand modules for expanded control.
Configuration Menu – Other Devices
Explains configuration settings related to connected devices and features like heat demand.
Heat Demand
Explains how to configure the 'Heat Demand' feature for maintaining water temperature.
Control Using the Halo Chlorinator
Pool Chlorine Level Control
How to adjust and control the pool's chlorine level using the chlorinator interface.
Regular Maintenance
Regular Maintenance Tasks
Routine cleaning and protective measures for the chlorinator controller enclosure.
Troubleshooting
Internet Connectivity
Steps to diagnose and resolve issues related to the chlorinator's internet connection.
Appendices
Appendix 1: Heater Connection Tables
Tables detailing how to connect various heater types to the Halo system.
Appendix 2: Zodiac® RS485 connection
Wiring diagram and details for connecting Zodiac RS485 devices.
Need help?
Do you have a question about the Halo Chlor 25 and is the answer not in the manual?
Questions and answers