Astralpool Halo Chlor 18 Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Astralpool Manuals
  4. Water Filtration Systems
  5. Halo Chlor 18
  6. Installation and operation manual

Astralpool Halo Chlor 18 Installation And Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Halo
Chlorinator
®
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment
by the jurisdiction in which the product will be installed where such state or local requirements exist. The maintainer must be a
professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions in this manual
can be followed exactly. Before installing this product, read and follow all warning notices and instructions that accompany this
product. Failure to follow warning notices and instructions may result in property damage, personal injury, or death. Improper
installation and/or operation may void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property damage,
or death.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use
of this product. This information should be given to the owner/operator of this equipment.
Installation and Operation Manual
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Halo Chlor 18 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Astralpool Halo Chlor 18

Summary of Contents for Astralpool Halo Chlor 18

  • Page 1 Installation and Operation Manual Halo Chlorinator ® WARNING FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product will be installed where such state or local requirements exist. The maintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions in this manual can be followed exactly.
  • Page 2 Serial No. : AUSTRALIA WARRANTY: For full warranty terms and conditions and to register your warranty, visit www.astralpool.com.au/warranty and complete your details. Or scan the QR code to go directly to the registration page. NEW ZEALAND WARRANTY: For full warranty terms and conditions and to register your warranty, visit www.astralpool.co.nz/warranty and complete your details.

  • Page 3: Table Of Contents

    Risk of electric shock - Install the controller at least 3.5 metres from the inside wall of the pool and/or hot tub using non‑metallic plumbing. If the supply cord is damaged, it must only be replaced by AstralPool, its service agent or a similarly qualified person, in order to avoid a hazard.

  • Page 4: Section 2. System Overview

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® Section 2. System Overview Contents of this Kit Before starting, check that you have the correct parts as shown in Figure 1 . If any parts are missing or incorrect, please call your local distributor or technical support at 1300 186 875 for assistance.

  • Page 5: Section 3. Installation

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® Section 3. Installation Pool/Spa Controller Pump 3 Way Valve Filter Heater Check Valve Spa Return Cell Pool Return Figure 3. Typical Installation Diagram Mounting the Controller The Halo Chlorinator must be mounted to a wall using the steel mounting bracket supplied (see Figure 1 ).

  • Page 6: Other Connections

    See also Appendix 1: Heater Connection Tables. Ai Mode is available on Halo Chlorinators that are fitted with pH and ORP sensors and a compatible AstralPool or Light Connection for a single AstralPool SLX or FLX light. Zodiac variable speed pump. In Ai mode, the Chlorinator This light must be assigned to Lighting Zone 1.

  • Page 7: Navigation Buttons

    Compatible pumps include AstralPool XT pumps and Zodiac variable speed pumps with RS485 connectivity. The “Favourites” button can be used to control your favourite modes, e.g., “spa at night”...

  • Page 8: Settings Buttons

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® 4.7.5 Timers Screen The “Timers” screen is accessed via the top ribbon on the home page. NOTE: If a Halo Chlorinator is connected to a Viron Connect 10 system the timers are controlled by the Viron Connect, rather than by the Halo Chlorinator, so the timers page will not appear.

  • Page 9: Other Equipment

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® The start and finish times can be adjusted on this screen, 4.7.7 Favourites as well as filter pump operation. If other equipment The Favourites page is accessed via the Favourites such as a variable speed pump is fitted, the speed can icon on the Home Page.
  • Page 10 In this example the pool has acid dosing as well as calibrate the pH sensor. (Calibration fluid is available chemical sensors. (Other installations will have less from AstralPool dealers.) options.) • For ORP sensors, the differences in pool chemistry (salt level, pH, cyanuric acid “stabiliser”, hardness, etc.) makes comparisons between the ORP level and...

  • Page 11: Remote Connection

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® a. Connection states Above the “Users” button the current state of the mobile connection will be shown. … = A Bluetooth connection is starting Blue = A Bluetooth connection established Green = Remote connection established b.

  • Page 12: Setup Required To Use The Halo Chlorgo App

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® The “Configure” button shows the existing internet Setup Required to Use the Halo connection details (if any). If any Internet connection test ChlorGo App fails, see Section 9, Troubleshooting for more information.

  • Page 13: Section 5. Chlorinator Configuration And Setup

    Figure 29. Halo Pump Configuration Screen please note that you should only adjust the cell reversal NOTE: If you have installed an AstralPool Variable Speed (wired) period under advise from your local pool professional pump, you cannot set the RPM levels for Low, Medium and as decreasing the time can greatly reduce the cell life High speed on the chlorinator.

  • Page 14: Connecting Other Devices To A Halo Chlorinator

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® The priming time can also be adjusted on this page. Halo pH Doser The pump flow check feature can be disabled on this One Halo pH doser can be connected to a Halo page if required (not advisable), and a “Cleaning Interlock”...

  • Page 15: Section 6. Control Using The Halo Chlorinator

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® however it is generally more efficient to run at medium speed for the majority of the timer period, so in this case you may have timer 1 for 1 hour on high speed (to skim leaves off the pool), timer 2 for 3 hours on medium speed,...

  • Page 16: Section 7. Control Using The Halo Chlorgo App

    ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® 2. Standard chlorinator with pH dosing If a Halo Doser is added, basic pH control is achievable, and an acid level gauge is added to the menu option. The “Acid Level” slider is used to estimate how much acid needs to be added.

  • Page 17: Section 9. Troubleshooting

    10.1 Appendix 1: Heater Connection Tables External Temperature Heater Type Device to Connect to Connector Notes Sensor required? AstralPool “Genus” style Heaters Halo Chlor RJ12 AstralPool IXi Heaters Halo Chlor RS485 IXI/JXI with FW revision 7.05AU units will require an interface cable (part number 14608).

  • Page 18: Appendix 2: Zodiac ® Rs485 Connection

    ® ® External Temperature Heater Type Device to Connect to Connector Notes Sensor required? AstralPool “Genus” style Heaters Halo Chlor RJ12 AstralPool IXi Heaters Halo Chlor RS485 IXI/JXI with FW revision 7.05AU units will require an interface cable (part number 14608). which uses...
  • Page 19 ENGLISH AstralPool Halo Chlorinator | Installation & Operation Manual ® ® NOTES Page 19...
  • Page 20 A Fluidra Brand | AstralPool.com.au | AstralPool.co.nz Fluidra Group Australia Pty Ltd | 1 Herbert Place, Smithfield NSW 2164, PO Box 7238 Wetherill Park NSW 1851, Australia ABN: 87 002 641 965 | 1300 186 875 Fluidra NZ Ltd | 13 Douglas Alexander Parade | Rosedale Auckland 0632, New Zealand NZBN: 942 903 181 70759 | 0800 807 665 ©2024 Fluidra.

This manual is also suitable for:

Halo chlor 25Halo chlor 35Halo chlor 45203852038620387 ... Show all

Table of Contents