Chapter 2
Board Installation
Board Installation
Unpacking
The motherboard package should contain the following:
(1) Trinity KT-A mainboard
(1) 34-pin floppy cable pack
(1) 80-pin ATA-100 IDE cable* included
(1) Trinity KT-A User's Manual
(1) Driver CD
Installation
You are now ready to install your motherboard. The mounting hole pattern of the
Trinity KT-A matches the ATX system board specifications. Your chassis should
support a standard ATX mainboard form factor.
How to install our products right... the first time.
What's the first thing I should do?
The first thing you should do is read this user's manual. It contains important
information which will make configuration and setup much easier.
*
ATA-100 cables are identical to ATA-66 cables, therefore they are backward
compatible
10
http://www.tyan.com