TYAN TOMCAT I7230W Manual page 41

Quick Boot Mode
This BIOS feature allows you to decrease the time it takes to boot up the
computer by shortening or skipping certain standard booting procedures.
If enabled, the BIOS will shorten the booting process by skipping some tests
and shortening others. In addition, it will also perform the following to further
speed up the booting process:
Spin up the hard disks as soon as power is supplied (or as soon as
possible)
Initialize only critical parts of the chipset
Read memory size from the SPD (Serial Presence Detect) chip on the
memory modules
Eliminate logo delays
If disabled, the BIOS will run the whole gamut of boot-up tests.
It is recommended that you disable this feature when you boot up a new
computer for the first time or whenever you install a new piece of hardware.
This allows the BIOS to run full diagnostic tests to detect any problems that may
slip past Quick Boot's abbreviated testing scheme.
After a few error-free test runs, you should enable this feature for much faster
booting.
Enabled / Disabled
Error Halt in POST
Select Disabled if user don't want stop POST with any error.
Enabled / Disabled
41
http://www.tyan.com