Engine Frame and
Wheel Assembly
High Pressure
Hose
1.
Locate and remove all loose parts
from the carton.
2.
Cut four corners of the carton from
top to bottom and lay the panels
fl at.
3.
Remove fi ve colored quick
connect nozzles from plastic
bag and insert them into correct
grommet on the nozzle holder.
NOTE: Nozzles are color coded
to match colored nozzles on
panel.
A16617
CARTON CONTENTS
Operation
Manual
Chemical
Hose
Engine
Manual
Spray Gun
Quick Connect Spray Wand
ASSEMBLY INSTRUCTIONS
Knobs
"J" Bolts
Bagged Parts
Handle
4.
Assemble a "J" bolt through
frame as shown (both side).
5.
Slide handle onto "J" bolts and
attach with knobs (both sides) .
Tighten securely.
6.
Feed end of chemical hose
(without filter) through front panel
and press onto barbed fitting of
chemical injector.
8- ENG
Quick
Connect
Cleaning
Nozzles
Tool
Accessory
Storage Panel
Cover