Record All Information and attach sales
receipt here for future reference:
Purchase Date:__________________________
Serial #: ________________________________
Questions? 1-800-888-2468
Learn more about your pressure washer,
get answers to frequently asked questions,
and register on line at
www.excellpressurewasher.com
Table of Contents
Safety Guidelines/Definitions.................. 2
Consumer Saftey Information ................ 2
Important Safety Instructions ..............2-7
Specifications .......................................... 7
Carton Contents ...................................... 7
Assembly Instructions ............................. 8
Operating Instructions ...................... 9-13
Please make certain that the person who is to use this equipment carefully
reads and understands these instructions before operating.
Pressure Washer
Operation Manual
Maintenance .................................... 13-14
Storage ..................................................15
Trouble Shooting Guide .................. 15-16
Accessories ...........................................16
Repairs ...................................................17
Warranty.................................................18
Français ........................................... 19-36
Español ............................................ 37-56
IMPORTANT
Part No.
for model VR2522
A16637
Rev. 1 11/09/06
Need help?
Do you have a question about the VR2522 and is the answer not in the manual?
Questions and answers
My VR2522 Pressure washer has a plastic tube that attaches to a port upstream of the hose connection which is for introducing soap. When operating, there is no suction to introduce soap into the water stream. How can I fix this?
To fix the soap suction issue on your Excell VR2522 Pressure Washer:
1. Check the detergent uptake: Ensure the detergent hose is properly connected to the detergent inlet port, which is accessible without the shroud.
2. Inspect the filter: Make sure the water inlet filter is properly installed and clean. The pressure washer should not be operated without the filter.
3. Verify the unloader valve: The unloader valve, which can be adjusted with a 17 mm wrench, should be set correctly to allow proper suction.
4. Use correct hose length: The high-pressure hose should not exceed 100 feet to maintain proper suction.
5. Use the correct detergent: Use only approved detergents; corrosive or non-recommended chemicals can damage the pump and prevent suction.
6. Remove air from the system: Squeeze the trigger to remove remaining air from the hose before operating.
If the issue persists, check for blockages or damage in the detergent hose.
This answer is automatically generated
VR2522 type 1
The Excell VR2522 pressure washer has the following Type 1 specifications:
- Pressure: 2500 PSI
- Flow Rate: 2.2 GPM
- Pump: Oil-free DeVilbiss pump, catalog #A07908
- Engine: Powered by Honda IC-2
- Wand: 22MM variable adjustment from 0° to 40°
- Hose: 25-foot non-marking high-pressure hose with 22MM twist connectors
- Features: On-board storage, small frame footprint
This model is no longer sold and is for reference only.
This answer is automatically generated