Related Manuals for Furuno AU-500
Summary of Contents for Furuno AU-500
- Page 1 GNSS Antenna AU-300/AU-500 Installation Manual (Document No. SE23-900-017-02) www.furuno.com...
- Page 2 Any information of this documentation shall not be disclosed to any third party without permission of the publisher, FURUNO ELECTRIC CO., LTD. FURUNO ELECTRIC CO., LTD. reserves the right to make changes to its products and specifications without notice. All brand and product names are registered trademarks, trademarks or service marks of their respective...
- Page 3 GNSS Antenna AU-300/AU-500 Installation Manual SE23-900-017-02 Safety Precautions ・Please read carefully before use. Be sure to follow these instructions. After reading this manual, be sure to keep it carefully. ・The precautions listed below are to prevent risk of harm to the user and others, as well as to prevent property damage.
- Page 4 GNSS Antenna AU-300/AU-500 Installation Manual SE23-900-017-02 Revision History Version Contents Date First Release 2023.09.29 Clerical error correction 2024.01.29 Change picture 2024.06.06...
- Page 5 GNSS Antenna AU-300/AU-500 Installation Manual SE23-900-017-02 Contents Purpose ····················································································································· 1 Preparing for Installation ····························································································· 1 Package contents ······································································································· 2 Installation Procedure ································································································· 3...
-
Page 6: Purpose
Use a suitable cable type and length to to ensure that the signal delivered to the receiver is of sufficient level for normal. In some cases, it may be necessary to add a GNSS inline amplifier. Please contact your Furuno... -
Page 7: Package Contents
GNSS Antenna AU-300/AU-500 Installation Manual SE23-900-017-02 3 Package contents (1) GNSS Antenna: AU-300/AU-500 (2) Mounting hardware : AFB-01 (Sold separately) Pipe Outline Mounting auxiliary bracket Outline Stainless band Outline ※DIMENSION IN DRAWING FOR REFERENCE ONLY. Connector conversion cables N(J)-TNC(P) conversion cable NJ-TP-3DXV-1 or coaxial cable with TNC(P) connector... -
Page 8: Installation Procedure
Pass the coaxial cable through from the end without screw threads. (2) Pass the stainless band through the coaxial cable and pipe (3) Connect the cable’s TNC connector to the TNC (J) connector of the GNSS antenna AU-300/AU-500. Do not overtighten, use power tools for assembly, or disassemble. - Page 9 GNSS Antenna AU-300/AU-500 Installation Manual SE23-900-017-02 (4) Screw the pipe all the way on to the AU-300/AU-500 antenna thread. Squeeze the stainless band and pass it through the hole of the mounting auxiliary bracket. (5) Squeeze the stainless band and pass it through the hole of the mounting auxiliary bracket.
- Page 10 GNSS Antenna AU-300/AU-500 Installation Manual SE23-900-017-02 AU-300/AU-500 Stainless band Pipe Screw the stainless band. Mounting auxiliary bracket Pole or mast (6) Pass the stainless band through the pole or mast and tighten the screw to secure the antenna pipe. The stainless band is tightened by turning the screw clockwise with a cross-head or Phillips screwdriver.
Need help?
Do you have a question about the AU-500 and is the answer not in the manual?
Questions and answers