Power Management - TYAN TITAN III Manual

5.4 Power Management

w w Advanced Power Management
This option enables or disables power management.
The default is disabled.
w w Standby to Suspend Timeout Value
This option indicates the time before standby and suspend power saving
modes will occur. The options are from disabled thru 255 minutes.
The default is disabled.
w w IDE Drive Power Down In
This option specifies which mode the IDE drives will power down in.
The options are disabled, standby or suspend.
The default is disabled.
w w VESA Video Power Down In
This option specifies which mode the video will power down in.
The options are disabled, standby or suspend.
The default is disabled.
w w VESA Power Down In
This option specifies the power saving mode for the video.
The options are standy, suspend or off.
The default is standby.
w w Slow Clock Ratio
This ratio indicates the amount the CPU will be slowed when the CPU
enters standby mode.
The default is 1:1.
w w IRQ x Break Event (x= 0 to 15)
These break events indicate which IRQ events will wake up the system
and/or reload the standby and suspend timers. The options are disabled
and enabled.
The default is disabled.
S1468-001-01 50