Table of Contents
Advertisement
2.32 – Connecting External Devices
The following diagrams will detail the rear port stack for this S2875 motherboard:
PS/2 Mouse
PS/2 Keyboard
USB 1.1
Ports
Left Right
100Mbps
1000Mbps
2.33 – Installing the Power Supply
There are three power connectors on your Tiger K8W S2875. By default, the Tiger K8W
S2875 requires that you have an EPS12V power supply that has a 24-pin and an 8-pin
power connector. However, the Tiger K8W S2875 is also ATX12V compatible. All 3 power
connectors need to be used if you plan on using the ATX12V power.
Power Supply
EPS12V
ATX12V
Parallel Port
Serial Port
LAN Link/Activity LED Scheme
Speed
Link LED (left side)
10Mbps
Main
power connector
Required
Required
http://www.TYAN.com
10/100/1000 Mbit
Ethernet Port
Serial Port
USB 2.0
Ports
Off
Orange
Green
12V
power connector
Required
Required
31
MIC-In/Center & Subwoofer Speakers
Line-In/Rear Speakers
Line-Out/Front Speakers
Activity LED (right side)
Blink
Blink
Blink
4-pin AUX
power connector
Not required
Required
Advertisement
Table of Contents
