TYAN TIGER K8W Manual page 44

3.04.7 – Hyper Transport Configuration Sub-Menu
You can use this screen to view the Hyper Transport Configuration Menu. Use the
Plus and Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
Main Advanced
Hyper Transport Configuration
CPU1: CPU2 HT Link Speed
CPU1: CPU2 HT Link Width
CPU1: AGP HT Link Speed
CPU1: AGP HT Link Width
Feature
Hyper Transport Configuration
CPU1: CPU2 HT Link Speed
CPU1: CPU2 HT Link Width
CPU1: AGP HT Link Speed
CPU1: AGP HT Link Width
BIOS Setup Utility
PCI/PnP Boot
Option
Auto
200MHz
400MHz
600MHz
800MHz
1GHz
Auto
2 Bit
4 Bit
8 Bit
16 Bit
Auto
200MHz
400MHz
600MHz
800MHz
Auto
2 Bit
4 Bit
8 Bit
16 Bit
http://www.TYAN.com
Security Chipset
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
[Auto]
[Auto]
Use [+] or [-] to
configure system time.
[Auto]
[Auto]
¡ ö
¡ ô ¡ õ
+/-
F1
F10 Save and Exit
ESC Exit
Description
Specify CPU1 to CPU2 Hyper
Transport Link Clock frequency.
If CPU2 is absent, the selection
item will be hide.
Specify CPU1 to CPU2 Hyper
Transport Link Data width.
If CPU2 is absent, the selection
item will be hide.
Specify CPU1 to AGP Hyper
Transport Link Clock frequency.
Specify CPU1 to AGP Hyper
Transport Link Data width.
44
Power Exit
¡ ÷ Select Screen
Select Item
Change Option
General Help