Table of Contents
Advertisement
2.23 – Installing the Processor(s)
Your brand new Tiger K8W supports the latest 64-bit processor technologies from AMD.
Check our website for latest processor support.
http://www.tyan.com
NOTE
If using a single processor, it MUST be installed in socket CPU1.
.
TYAN is not liable for damage as a result of operating an unsupported configuration.
The diagram is provided as a visual guide to help you install socket processors and may
not be an exact representation of the processors you have.
o
Lift the lever on the socket until it is approximately 90
or as far back as possible to the
socket.
Align the processor with the socket. There are keyed pins underneath the processor to
ensure that the processor's installed correctly.
Seat the processor firmly into the socket by gently pressing down until the processor sits
flush with the socket.
Place the socket lever back down until it locks into place.
Your processor is installed.
Repeat these steps for the second processor if you are using two processors.
Take care when installing processors as they have very fragile connector pins below the
processor and can bend and break if inserted improperly.
20
http://www.TYAN.com
Advertisement
Table of Contents
