Installing The Processor Heatsink - TYAN TIGER I7525 User Manual

Tiger i7525 (S2672)
3.7 – Installing the Processor Heatsink
DCA (Direct Chassis Attach) is required to install the Intel Xeon
(S2672). The processor heat-sinks need to be Intel's CEK (Common Enabling Kit) compliant.
Each processor heat-sink needs to be mounted to chassis with which are 8 processor heat-sink
mounting holes (4 holes for each processor)
- Memory Type:
The Tiger i7525 (S2672) supports DDR2 Registered type memory modules and requires
minimum two memory modules to power up the system. Unbuffered or DDR-I Memory is
NOT supported.
Chapter 2: Board Installation
19
http://www.tyan.com
®
processors on Tiger i7525