Chapter 1: Introduction; Congratulations; Hardware Specifications - TYAN TIGER I7525 User Manual

Tiger i7525 (S2672)

Chapter 1: Introduction

1.1 – Congratulations!
You have purchased one of the most powerful Intel Xeon
standard ATX form factor.
Based on the Intel E7525 chipset, the Tiger i7525 (S2672) features some state-of-the-art
technologies such as dual/single 800 MHz FSB Xeon
buses, dual channel DDR2 memory design, onboard x1 PCI-Express Gigabit Ethernet port,
Serial-ATA IDE ports,
By doubling the capability of existing AGP8x designs with transfer rates of 4.0 Gigabytes per
second over a x16 PCI Express lane for graphics controllers, the onboard x16 PCI-Express slot
supports a high performance graphics infrastructure for high-end gaming or multimedia
Visit Tyan's website at http://www.tyan.com. There, you can find information on all of Tyan's
products with up-to-date FAQs, a list of worldwide distributors, Tyan software utilities, the latest
drivers, memory compatibility listings, and BIOS setting explanations.
1.2 – Hardware Specifications
Processors
-
Dual mPGA604 ZIF sockets
-
Supports single or dual Intel Xeon
processors
-
800MHz Front-Side Bus
-
Dual onboard 4-phase EVRD10.1
complaint voltage regulation design
Chipset
-
Intel's Tumwater (E7525) chipsets
E7525 MCH (North Bridge)
ICH5R (South Bridge)
-
SMSC LPC47B397 Super I/O chip
Expansion Slots
-
One X16 PCI-Express high-performance
Graphics slot
-
One x8 PCI-Express slot with x4 PCI-
Express signals
-
Four PCI 32-bit 33MHz (5-Volt) slots
-
Total of six usable slots
Memory
-
Four 240-pin 1.8-Volt DDR2 400 DIMM
sockets
-
Dual channel memory bus
-
Supports ECC or non-ECC memory
-
Up to 8GB of Registered DDR2 DDR
modules
®
processor support, multiple PCI-Express
and multiple USB2.0
System Hardware Health Monitor
-
Total seven 3-pin fan headers with
tachometer monitoring and five of
®
them with PWM control
-
Chassis intrusion header
-
Temperature and voltage monitoring
-
Watchdog timer
BIOS
-
Phoenix BIOS 4Mbit flash ROM
-
Supports ACPI 1.0b, PnP, DMI 2.0
-
Auto configuration of IDE devices
-
User-define hardware monitoring
-
Multiple boot options
-
Power Management: ACPI S1, S3,
S4 and S5 modes
Other Integrated I/O Interfaces
-
One floppy connector for up to two
drives
-
One UART serial port connector
-
One ECP/EPP/SPP parallel
connector
-
Eight USB2.0 ports (2 front USB
ports via an optional cable)
-
PS/2 mouse & keyboard ports
1
http://www.tyan.com
Chapter 1: Introduction
®
-based workstation solutions in a
(Universal Serial Bus)
.
ports.