TYAN TIGER I7520SD Manual page 67

96H TP_CLEAR_HUGE_ES
97H TP_MP_FIXUP
98H TP_ROM_SCAN
99H TP_FDISK_CHECK_SMART
9AH TP_MISC_SHADOW
9BH TP_PMCPUSPEED
9CH TP_PM_SETUP
9DH TP_SECURITY_INIT
9EH TP_IRQS
9FH TP_FDISK_FAST_INIT2
A0H TP_TIME_OF_DAY
A2H TP_KEYLOCK_TEST
A4H TP_KEY_RATE
A8H TP_ERASE_F2
AAH TP_SCAN_FOR_F2
ACH TP_SETUP_CHECK
AEH TP_CLEAR_BOOT
B0H TP_ERROR_CHECK
B1H TP_ROMPILOT_UNLOAD
B2H TP_POST_DONE
B3H TP_ENH_CMOS_STORE
B4H TP_ONE_BEEP
B5H TP_QUIETBOOT_END
B6H TP_PASSWORD
B7H TP_ACPI
Performs a shutdown eight to
transition from the warm start table
to the cold start table. (Optional)
Fix-up MP table physical pointer
and checksum. (Optional)
Configures Non-PCC PnP ISA
devices, PCI IRQs, enables PCI
devices and rom scan.
POST task to check SMART
status. (Optional)
(Optional)
(Optional)
Late SMM initialization. (Optional)
Initializes the system security
engine. (Optional)
Enables the proper hardware
interrupts.
(Optional)
Sets time of day.
Tests if key-lock or keyboard
controller password is on.
(Optional)
(Optional)
Removes "Press F2" prompt from
the screen.
Checks if user has requested
SETUP.
Checks to see if SETUP should be
executed.
Clears ConfigFailedBit and
InPostBit in CMOS.
Checks for POST errors.
(Optional)
Sets/clears status bits to reflect
POST is completed.
Stores enhanced CMOS values in
Non-volatile area. (Optional)
(Optional)
(Optional)
Queries for password before boot.
(Optional)
Setups ACPI table in shadow RAM
67