TYAN TIGER I7520SD Manual page 64

22H TP_8742_TEST
24H TP_SET_HUGE_ES
26H TP_ENABLE_A20
28H TP_SIZE_RAM
29H TP_PMM_INIT
2AH TP_ZERO_BASE
2BH TP_ENH_CMOS_INIT
2CH TP_ADDR_TEST
2EH TP_BASERAML
2FH TP_PRE_SYS_SHADOW
30H TP_BASERAMH
32H TP_COMPUTE_SPEED
33H TP_PDM_INIT
34H TP_CMOS_TEST
36H TP_CHK_SHUTDOWN
38H TP_SYS_SHADOW
3AH TP_CACHE_AUTO
3BH TP_DBGSRV_INIT
3CH TP_ADV_CS_CONFIG
3DH TP_ADV_REG_CONFIG
3FH TP_ROMPILOT_MEMORY
41H TP_ROMPILOT_INIT
42H TP_VECTOR_INIT
45H TP_DEVICE_INIT
46H TP_COPYRIGHT
48H TP_CONFIG
49H TP_PCI_INIT
4AH TP_VIDEO
Report if there was a keyboard
controller failure.
Makes huge (4GB) segments for
DS, ES, FS, GS, SS.
(Optional)
Determines DRAM size and
configure the chipset accordingly.
Initializes the POST Memory
Manager.
Zeros the RAM up to minimum
RAM specified in the chipset RAM
table.
(Optional)
Tests address lines of the RAM.
Tests the first 4MB of RAM.
Initializes external cache before
shadowing. (Optional)
(Optional)
Computes CPU clock speed in
MHz.
Initializes the Phoenix Dispatch
Manager.
(Optional)
Vector to proper shutdown routine.
Shadows the system BIOS.
Sizes the external cache.
(Optional)
Advanced chipset configuration.
General dispatcher for alternate
register. (Optional)
(Optional)
(Optional)
Initializes interrupt vectors.
POST device initialization routine.
(Optional)
Verifies that the copyright
message is intact.
Verifies the hardware configuration
and note whether we have color or
monochrome mode.
Initializes PNP and PCI.
Initializes the video.
64