TYAN TIGER I7520SD Manual page 33

3.2.1 IDE Channel 0/1 Master/Slave Setup
Computer detects IDE drive type from drive C to drive F.
Press Enter on any of the Channel 0 Master/Slave or Channel 1 Master/Slave
options to view advanced details of the corresponding drive. The system
displays advanced details like the number of heads/cylinders/sectors on the
detected disk and the maximum storage capacity of the disk.
The system displays advanced details like the number of
heads/cylinders/sectors on the detected disk and the maximum storage
capacity of the disk.
This option lets you set the following hard disk parameters:
Multi-Sector Transfers
This option allows you to specify the number of sectors per block for multiple
sector transfers.
16 Sectors / 2 Sectors / 4 Sectors / 8 Sectors / Disabled
LBA Mode Control
Enables or disables LBA Mode.
When LBA is turned on, the BIOS will enable geometry translation. This
translation may be done in the same way that it is done in Extended CHS or
large mode, or it may be done using a different algorithm called LBA-assist
translation. The translated geometry is still what is presented to the operating
33