TYAN TIGER I7505 Manual page 41

Navigating the FastBuild™ Setup Menu
When using the menus, these are some of the basic navigation tips: Arrow keys highlights through
choices; [Space] bar key allows to cycle through options;
[Enter] key selects an option; [ESC] key is used to abort or exit the current menu.
This is the first option screen when entering the FastBuild ™ Setup.
FastBuild (tm) Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
Auto Setup........................................................ [ 1 ]
View Drive Assignments................................... [ 2 ]
Define Array...................................................... [ 3 ]
Delete Array...................................................... [ 4 ]
Rebuild Array.................................................... [ 5 ]
Press 1...5 to Select Option
NOTE: After configuring an array using FastBuild™, you should FDISK and
format the arrayed drive(s) if you are using new, blank drives. Depending on
the type of array you are using.
Creating Arrays Automatically
The Auto Setup <1> selection from the Main Menu can intuitively help create your disk array. It will
assign all available drives appropriate for the disk array you are creating. After making all
selections, use Ctrl-Y to Save selections. FastBuild™ will automatically build the array.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Optimize Array for:
Mode............................................................................... Stripe
Spare Drive.............................................................................1
Drive(s) used in Array.............................................................2
Array Disk Capacity (size in MB) ....................................16126
[↑] Up [↓] Down [←, →, Space] Change Option [ESC] Exit [Ctrl-Y] Save
[ Main Menu ]
[ Keys Available ]
[Auto Setup Options Menu]
Performance
[Array Setup Options Menu]
[ Keys Available ]
41
http://www.TYAN.com
[ESC] Exit