TYAN TIGER I7505 Manual page 27

3.4.4 – IDE Devices Sub-Menu
Feature
Primary/Secondary Master
Primary/Secondary Slave
Local Bus IDE
3.4.5 – Embedded Promise Controller Sub-Menu
Feature
Promise Chip
Option ROM Mode
3.4.6 – I/O Device Configuration Sub-Menu
Feature
Serial Port A
Serial Port A Base I/O Address
Serial Port A Interrupt
Parallel Port
Parallel Port Mode
Parallel Port Base I/O Address
Parallel Port Interrupt
Parallel Port DMA Channel
Option
Auto
User
ATAPI Removable
CD-ROM
None
Auto
User
ATAPI Removable
CD-ROM
None
Both
Primary
Secondary
Disable
Option
Enabled
Disabled
RAID
Ultra ATA
Option
Enabled
Disabled
Auto
3F8/2F8/3E8/
2E8
IRQ4 / IRQ3
Enabled
Disabled
Auto
ECP
EPP
Bi-directional
Output Only
378 / 278 / 3BC
IRQ7 / IRQ5
DMA3 / DMA1
27
http://www.TYAN.com
Description
Auto - To determine the IDE drive type
by system BIOS
User - To set IDE drive type by user
ATAPI Removable - Read-and-write a
media (e.g., LS120, USB floppy, USB
ZIP)
CD-ROM - Readable CD-ROM drive
This setting determines whether the
ICH4 primary and secondary IDE
channels are activated.
Description
This setting determines whether the
onboard Promise Chip is activated
This setting determines what type of
configuration you are using with the
Promise chip
Description
Enabled – To turn on the port.
It requires entering a base I/O address
and an interrupt number
Disabled – To turn off the port
Auto – To configure the port
automatically during POST
Enabled – To turn on the port
It requires entering a base I/O address
and an interrupt number
Disabled – To turn off the port
Auto – To let BIOS configure the port
automatically during POST