Related Manuals for MCZ VIVO 90 HYDRO 24 M1
Summarization of Contents
INTRODUCTION
REVISIONS TO THE PUBLICATION
Information regarding the copyright and reproduction of the manual's content.
CARE OF THE MANUAL AND HOW TO CONSULT IT
Guidelines on storing and consulting the user manual for optimal use.
SYMBOLS USED IN THE MANUAL
Explanation of symbols used in the manual to convey warnings and information.
1-WARNINGS AND WARRANTY CONDITIONS
SAFETY PRECAUTIONS
Essential safety rules for installation, operation, and maintenance of the appliance.
INFORMATION
General information on first use, cleaning, and intended purpose of the product.
INTENDED USE
Specifies the product is for indoor use with wood pellets only.
PRODUCT PERFORMANCE CHECKS
Details on testing, fuel compliance, and factors affecting product performance.
WARRANTY CONDITIONS
Terms, duration, exclusions, and requirements for product warranty validity.
2-INSTALLATION
PELLETS
Information on pellet types, quality standards, and proper storage.
FOREWORD
General guidance on installation location and installer responsibilities.
MINIMUM DISTANCES
Required clearances from walls, furniture, and flammable materials for safe installation.
CONNECTION OF THE SMOKE EXHAUST DUCT
Guidelines for safe connection of the smoke outlet pipe, considering materials.
FLUE
Requirements for flue installation, materials, and configuration for efficient operation.
TECHNICAL SPECIFICATIONS
Details on flue sealing, insulation, and measurements for roof installations.
SIZING
Guidance on flue height, cross-section, and types for optimal draught.
MAINTENANCE
Instructions for cleaning and maintaining the flue and chimneypot.
CHIMNEYPOT
Recommendations for windproof chimneypots and their correct placement.
EXTERNAL AIR INLET
Requirements for providing adequate external air for proper combustion.
CONNECTION TO THE FLUE
Specifications for smoke duct connection, length, and bends.
3-DRAWINGS AND TECHNICAL FEATURES
DRAWINGS AND CHARACTERISTICS
Visual representation and key dimensions of the pellet insert models.
TECHNICAL CHARACTERISTICS VIVO 90 HYDRO 16 M1
Detailed technical specifications for the VIVO 90 HYDRO 16 M1 model.
TECHNICAL CHARACTERISTICS VIVO 90 HYDRO 24 M1
Detailed technical specifications for the VIVO 90 HYDRO 24 M1 model.
4-UNPACKING
PREPARATION AND UNPACKING
Procedures for safely unpacking and handling the product.
5-OVERALL DIMENSIONS
VIVO 90 HYDRO 16 M1 / VIVO 90 HYDRO 24 M1 DIMENSIONS
Dimensional overview of the product and required installation clearances.
EXAMPLE OF PLACEMENT AT A 90° ANGLE
Illustrates product placement at a right angle with relevant dimensions.
EXAMPLE OF PLACEMENT AT A 45° ANGLE
Illustrates product placement at a 45-degree angle with relevant dimensions.
6-CONNECTIONS
COMBUSTION AIR
How to supply combustion air, either from the room or externally.
CONNECTION OF THE SMOKE OUTLET DUCT
Guidance on safe connection of the smoke outlet pipe, considering materials.
7-PRELIMINARY STEPS
PRELIMINARY STEPS
Steps to release and prepare the fixed part of the insert for installation.
FRAME ASSEMBLY
Instructions for assembling the frame around the insert.
8-TYPE OF FASTENING
HOW TO FASTEN THE INSERT
Mandatory procedures for anchoring the product to a surface or support.
Fastening to an existing surface
Recommended methods and materials for fastening to existing surfaces.
Fastening to the horizontal support
Steps for installing the product on a dedicated horizontal support.
9-ACCESSORIES
ACCESSORIES
Details on the pellet level sensor and optional support.
10-INSTALLATION
PELLET LOADING CHUTE ASSEMBLY
Instructions for assembling and installing the pellet loading chute.
RIGHT CHUTE SIDE ASSEMBLY
Specific instructions for installing the chute on the right side.
PRODUCT INSERTION HOLE
Dimensions and requirements for the wall opening for product insertion.
CONNECTION OF SWITCH AND CONTROL PANEL
How to connect the control panel and switch to the product.
HATCH ASSEMBLY
Steps for fastening the hatch after wiring and testing.
PELLET HATCH OPENING/CLOSING
How the pellet hatch opens and closes using magnets.
11-LOADING THE PELLETS
LOADING THE PELLETS
Step-by-step guide for loading fuel into the hopper.
12-DOOR OPENING
DOOR OPENING
Instructions on how to open the product door using the handle.
13-ELECTRICAL CONNECTION
ELECTRICAL CONNECTION
Guidelines for safe and compliant electrical connections by qualified personnel.
STOVE POWER SUPPLY
How to connect the power cable and locate fuses for the stove.
USB SOCKET
Information on using the USB socket for software updates by technicians.
SAFETY
Procedures for smoke spillage, explosive ignition, and user training.
14-HYDRAULIC CONNECTION
PLUMBING CONNECTION
Requirements for connecting the stove to the plumbing system by specialists.
CONNECTION DIAGRAM
Labels and connections for water supply, return, and system ports.
DISCHARGE VALVE 3 bar
Details on the safety valve and its required drain connection.
CONNECTING THE SYSTEM
Steps for connecting the stove to the heating system pipes, ensuring flexibility.
CLEANING THE SYSTEM
Recommendations for cleaning the heating system before connecting the stove.
FILLING THE SYSTEM
Procedures for filling the heating system and setting correct pressure.
WATER CHARACTERISTICS
Advice on water hardness and its impact on system performance and longevity.
Need help?
Do you have a question about the VIVO 90 HYDRO 24 M1 and is the answer not in the manual?
Questions and answers