Table of Contents
Advertisement
Tiger i7320 / Tiger i7320R
Display array properties and members
1.
From the Adaptec SATA HostRAID Controller#0 Array Configuration Utility menu,
select Manage Array.
2.
From the List of Arrays dialog box, select the array you want to view and press Enter.
The Array Properties dialog box appears, showing detailed information on the array.
The physical disks associated with the array are displayed here.
3.
Press Esc to return to the previous menu.
Deleting Arrays
Take caution in using this option; All data on the RAID drives will be
lost! Deleted arrays cannot be restored.
1.
From the Adaptec SATA HostRAID Controller#0 Array Configuration Utility menu,
select Manage Array.
2.
Select the array you wish to delete and press Delete.
3.
In the Array Properties dialog box, select Delete and press Enter. The following prompt
is displayed:
WARNING: Deleting the array will result in data loss!
Do you want to delete the array? (Yes/No):
4.
Press Yes to delete the array or No to return to the previous menu.
5.
Press Esc to return to the previous menu.
4.5 Create Array
Before creating arrays, make sure the disks for the array are connected and installed in your
system. Note that disks with no usable space, or disks that are uninitialized are shown in gray
and cannot be used.
===Adaptec SATA HostRAID Controller#0 Array Configuration Utility===
Main Menu
Manage Array
Create Array
Add/Delete Hotspare
Initialize Drives
Create an Array
Warning
4-3
http://www.tyan.com
Chapter 4: SATA/RAID Setup
Advertisement
Table of Contents
