Table of Contents
Advertisement
Jumper Definitions – Feature jumpers
Jumper OFF – open (without jumper shunt)
Jumper ON – closed (with jumper shunt)
Onboard SCSI (JP2000)
Use JP2000 to enable or disable onboard SCSI. This jumper will affect both SCSI
channels A and B.
Enabled
If enabled, PCI slot 2 will operate at 66MHz. If disabled, PCI slot 2 will operate at
100 MHz.
Disabled
Onboard ATI RAGE XL (JP2003)
Use JP2003 to enable or disable onboard graphics controller.
Enabled
Onboard ATI RAGE XL graphics shares PCI bus with the onboard LAN
controllers.
Disabled
Onboard LAN 1 (JP2006) and LAN 2 (JP2007)
Use JP2006 to enable or disable onboard LAN 1.
Enabled
Use JP2007 to enable or disable onboard LAN 2.
Onboard LAN shares PCI bus with onboard ATI RAGE XL graphics controller.
Disabled
Hot Plug for PCI-X Bus 1 (JP3004)
1
Use JP3004 to enable or disable Hot Plug functionality on PCI-X slots 5, 6, 7, and 8.
Enabling Hot Plug will allow you to insert and remove 64-bit PCI expansion cards. OS
Enabled
and chassis support required.
1
Enabled = Close pins 2 and 3
Disabled = Close 1 and 2
Disabled
11
http://www.tyan.com
Advertisement
Table of Contents
