L2 Cache Memory/Sram Memory; Vrm (Voltage Regulator Module); Peripheral Device Installation; Connecting The Power Supply - TYAN TAHOE PLUS ATX Manual

Table of Contents

/SRAM Memory

2.7 Level 2 Cache Memory

The S1686S/D's L2 Cache Memory is built into the Intel Pentium II CPU.

There are no L2 Cache Memory slots or SRAM slots on the motherboard.

2.8 VRM (V oltage Regulator Module)

The CPU will program the VRM for the correct voltage needed. No

jumper settings are required. The S1686S/D has two built-in VRMs on

board.

Switching power supply circuitry has been designed into the

motherboard as well.

Install the motherboard after you have checked all of the jumper settings.

Also be sure to check all connectors thoroughly and read the technical manuals

that come with your peripheral cards before you install your add-on periph-

eral cards.

If a PCI-Bus interface card is to be installed in the system, any one of the

five PCI-Bus slots will support either a Master or a Slave device.

2.10 Connecting the Power Supply and On/Off Switch

The system is configured for a standard ATX power supply. The ATX

connectors can only be plugged in one way and should install easily.

S1686S/D-001-02

Table of Contents

S1686s S1686d