Beverage-Air SF1HC-1S Installation And Operating Instructions Manual

Beverage-Air SF1HC-1S Installation And Operating Instructions Manual

Advertisement

INSTALLATION AND OPERATING INSTRUCTIONS
for all
Slate Models
Rev. 06/19
SEE BACK COVER FOR
3779 CHAMPION BLVD, WINSTON-SALEM, NC 27105
WARRANTY REGISTRATION
Phone: (888) 845-9800 | Fax: (800) 253-5168 | Web: beverageair.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SF1HC-1S and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety
Safe Unit Usage
Guidelines for safe operation, including caster use, locking, and seeking assistance for heavy lifting.
Safe Maintenance Practices
Instructions on what not to do during maintenance, such as using sharp objects or storing flammable materials.
Recommended Maintenance Actions
Advice to use certified technicians and original factory parts for repairs.
Record Keeping
Section to record model number, serial number, and installation date for future reference.
Important Information
Operational Limitations
Specifies intended use in controlled indoor environments, avoiding moisture, overheating, or excessive cold.
Air Flow
Diagram illustrating air intake and exhaust, crucial for unit cooling and performance.
Agency Approvals
Details on marks found on the dataplate, including model/serial numbers and electrical requirements.
Clearance and Placement
Location Selection
Considerations for selecting a location, including clearance, floor load, ventilation, and power outlet.
Unpacking and Set Up
Uncrating Procedure
Steps for removing the unit from its packaging, including necessary tools and cautions.
Skid Removal and Caster Attachment
Instructions for safely removing the skid and attaching casters or legs to the unit.
Leveling the Unit
Guidance on how to level the cabinet using legs or casters to ensure proper door sealing and drainage.
Electrical
Power Cord
Information on the 115 volt power cord and plug, and replacement procedures.
Electrical Codes and Grounding
Mandatory grounding, prohibition of extension cords, and bypassing ground prongs.
Initial Start Up
Steps for plugging in the unit, initial air flow, and factory set temperature details.
Electrical Cautions
Precautions during moving or servicing, noting refrigerant flammability.
Cleaning and Maintenance
Cleaning Schedule
Overview of recommended cleaning frequency for cabinet, condenser coil, gaskets, and routine maintenance.
Daily Exterior Cleaning
Steps for washing, rinsing, drying, and polishing the exterior surfaces of the unit.
Weekly Interior Cleaning
Procedure for cleaning the interior, including removing contents, disconnecting power, and scrubbing surfaces.
Help and Troubleshooting
User Troubleshooting
Diagnosing common malfunctions like no cooling, unit silent, or temperature issues.
Technician Troubleshooting
Diagnosing issues for technicians, including compressor problems, fan issues, and excessive noise.
For the Service Technician
Other Service Information
Covers evacuation, charging, overcharge, and undercharge symptoms for R290 systems.
Limited Warranty
Additional Compressor Warranty
Details an extended two-year warranty for the sealed compressor, part only.
Residential Application Warranty
Specifies a one-year parts and labor warranty for units installed in residential applications.
Limitation of Liability
Excludes indirect, incidental, special, or consequential damages and limits remedies to repair or replacement.
Warranty Registration
Instructions and form for registering the product online or by mail.

Table of Contents