Table of Contents
Advertisement
Quick Links
TOUGHER FASTER SMARTER
Pneumatic Strip / Framing Nailer
FSN2283A / FSN2283AD / FSN3490
OPERATIONS and MAINTENANCE MANUAL
!
WARNING:
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD READ AND
STUDY THIS MANUAL TO UNDERSTAND AND FOLLOW THE SAFETY
WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE
REV Fabruary, 14, 2023
TOOL FOR FUTURE REFERENCE.
104598
Advertisement
Table of Contents
Related Manuals for Everwin FSN3490-CT
Summarization of Contents
Safety Instructions
Personal Protective Equipment
Emphasizes wearing appropriate eye protection and other safety gear for safe operation.
Air Supply and Connections Safety
Covers safe practices for air supply, hoses, fittings, and pressure limits to prevent injury.
Operational Safety Guidelines
Covers safe handling, fastener loading, and general operation to prevent accidental injuries.
Maintenance and Handling Safety
Outlines safety precautions during tool maintenance, handling, and when evaluating issues.
General Safety Instruction
Tool Usage and System Safety
Guidelines for proper tool use, system integrity, and general safe practices.
Hazard Identification and Control
Identifies and provides controls for multiple, projectile, and operating hazards.
Ergonomic and Workplace Hazards
Addresses risks from repetitive motion, workplace conditions, and accessory hazards.
Environmental and Pneumatic Hazards
Covers hazards related to dust, exhaust, noise, vibration, and pneumatic tools.
Specifications and Technical Data
Tool Specifications
Provides detailed physical and performance specifications for different nailer models.
Fastener Specifications
Details the types and dimensions of fasteners compatible with the tool.
Air Fitting and Operating Pressure
Specifies required air fittings and recommended operating pressure ranges for optimal use.
Air Consumption, Noise, and Vibration
Presents data on air consumption rates, noise levels, and vibration characteristics.
Operation: Trigger Selection
Contact Trip Operation
Explains the contact trip mechanism for rapid fastening.
Sequential Trip Operation
Details the sequential trip for precise fastener placement and enhanced safety.
Remote Fire Operation
Describes the remote fire mode for specialized mounted machine applications.
Operation: Air Supply and Connections
Fittings and Hoses Requirements
Specifies correct fittings, hoses, and quick-disconnect requirements for air supply.
Supply Source and Regulator Setup
Guides on using clean compressed air, regulators, and pressure control for safe operation.
Operating Pressure and Filter Maintenance
Covers optimal operating pressure and the importance of air filter maintenance.
Operation: Lubrication
Lubrication Procedures and Cold Weather
Recommends air tool oil for internal lubrication and antifreeze for cold weather operation.
Operation: Fastener Loading
Eye Protection for Loading
Stresses the necessity of eye protection during fastener loading to prevent eye injury.
Accidental Injury Prevention
Lists critical safety rules to avoid injuries during the fastener loading process.
Loading Procedure Steps
Step-by-step guide on how to properly load fasteners into the tool's magazine.
Operation: Tool Operation System
Pre-Operation Safety and Checks
Covers eye protection, manual review, and system identification before operating the tool.
Trip System Operations Explained
Details the function and operation of Contact, Sequential, and Remote Fire trip systems.
Operation: Tool Operation Check
Contact Trip Operation Check
Procedures to verify the correct functioning and safety of the contact trip system.
Sequential Trip Operation Check
Procedures to verify the correct functioning and safety of the sequential trip system.
Operation: Tool-Specific Features
Driving Depth Adjustment Guide
Instructions on how to adjust the driving depth for specific applications and materials.
Maintaining the Pneumatic Tool
Replacement Parts and Assembly
Guidance on using genuine parts and proper seal assembly procedures for maintenance.
Air Pressure and Volume Considerations
Explains the impact of air pressure and volume on tool performance and wear.
Driver Maintenance and Troubleshooting
Covers driver wear, length adjustment, and general troubleshooting advice for repairs.
Need help?
Do you have a question about the FSN3490-CT and is the answer not in the manual?
Questions and answers