Table of Contents
Advertisement
CLEAN AND CLEAR® PLUS
CARTRIDGE FILTER
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
Pressurized air can cause the lid to separate from the tank with great force. To reduce the
risk of severe injury or death, relieve pressure by opening air relief valve before opening filter.
Before starting the pump after servicing, ensure that clamp band is correctly fastened. See
IMPORTANT SAFETY INSTRUCTIONS, page ii and follow all instructions exactly; including
the Opening the Filter on page 4, Installing the Filter Lid and Clamp Ring on page 5,
and Start-Up Instructions on page 6.
SAVE THESE INSTRUCTIONS
INSTALLATION AND
USER'S GUIDE
Advertisement
Table of Contents
Related Manuals for Pentair CCP420
Summarization of Contents
Important Safety Instructions
Consumer Information and Safety
Provides essential safety guidelines for consumers regarding filter operation and maintenance.
System Operation Under High Pressure
Details hazards and procedures related to high pressure within the filtration system.
Avoid System Damage
Warns against exceeding maximum operating pressure and provides precautions for pressure testing.
General Information
Filter Overview
Describes the filter's key features and design for debris capacity and plumbing.
General Operation Information
Offers guidance on safe operation, maximum pressure, and pressure gauge usage.
Pressure Tests
Explains precautions and requirements for conducting pressure tests on the system.
Installation
Filter Location
Guidelines for selecting a suitable location and positioning the filter for optimal operation and servicing.
Filter Plumbing
Instructions for making plumbing connections according to codes, avoiding specific compounds.
Installing the Manual Air Relief Valve
Step-by-step instructions for installing the air relief valve and pressure gauge.
Opening, Closing, and Start-Up
Opening the Filter
Detailed procedure to safely open the filter, emphasizing pressure relief and clamp management.
Installing the Filter Lid and Clamp Ring
Instructions for correctly installing the filter lid and securing it with the clamp ring.
Start-Up Instructions
Steps for safely starting the filter system after installation or maintenance.
Maintenance
Maintaining the Pressure Gauge
Criteria for ensuring the pressure gauge is functioning correctly for system monitoring.
Cleaning the Manual Air Relief Valve
Procedure for cleaning the manual air relief valve to ensure proper operation.
When to Clean Your Filter
Guidance on determining when the filter requires cleaning based on pressure readings.
Cleaning the Filter Cartridges
Detailed steps for washing filter cartridges using a hose and optional cleaning solutions.
Acid Soaking the Filter Cartridges
Instructions for deep cleaning cartridges using an acid solution to remove mineral deposits.
Replacing Filter Cartridges
Steps for removing and installing new filter cartridges to maintain filtration performance.
Troubleshooting
Air Entering the System
Identifies symptoms and causes of air in the system and provides solutions.
Short Filter Cycles Between Cleaning
Explains why short filter cycles may occur, especially with new pools, and how to address them.
Pressure Drop on Gauge
Troubleshooting steps for diagnosing a sudden drop in pressure gauge reading.
Technical Data
Flow Rates
Provides flow rate specifications and turnover capacity for different filter models.
Dimensional Drawings
Includes diagrams showing the physical dimensions and clearance requirements for the filter.
Need help?
Do you have a question about the CCP420 and is the answer not in the manual?
Questions and answers