Selecting By Track Number; Track Search; Normal Search; Direct Search - Tascam Professional CD-RW900 Owner's Manual

Selecting by track number

Using the number keys on the remote control, the
number of the desired track can be entered direc-
tory. Even numbers with two or three digits can be
entered easily. For example:
Track 9: press '9' and 009 will be displayed.
Track 12: press '1' and '2' and 012 will be displayed.
Track 103: press '1' and '0' and '3' and 103 will be dis-
played.

Track search

Normal search

Press the search key continuously on the
∆/˚
front panel, or the
SEARCH ∆/˚
mote control. To stop the search function, simply
release the or the
∆/˚

Direct search

By specifying time from the start of a certain track,
you can start playback from a specified point of a
specified track.
Basic operation
During stop, play or playback standby modes, use
the number keys on the remote control to input
the three-digit track number (such as 002 for track
2), then the desired elapsed time (***min **sec)
from the start of that track.
Example: To specify 1 min 30 sec from the start
of track 2, input "002 001 30".
During input, the counter in the display will flash.
Pressing the key cancels the input at any
CLEAR
stage during input.
NOTE
Regardless of the time display mode (refer to "Time
display switching on page 18), the time from the
start of the specified track is displayed.
During stop or playback modes, when the final
digit is entered, the desired position is automati-
cally located and playback will begin from the
desired point. During playback standby mode,
at the desired point the unit will enter playback
standby mode.
NOTE
≠ If a point which does not exist is entered, Direct
Search time entry mode will be cancelled.
key on the re-
key.
SEARCH
4−Playback operations 1-Introduction
After input, press the
PLAY
Or, the key to cue the track at its head posi-
READY
tion and enter playback standby mode.
You can also enter the track number and start play-
back by pushing the
MULTI JOG
key.
ENTER
NOTE
This function cannot be used in Program or Random
mode.
NOTE
The search function does not operate with MP3
discs.
≠ The direct search function cannot be used in pro-
gram or random mode.
≠ For MP3 discs, time cannot be specified within a
track. However, if you input the three-digit track
number, playback will begin from the start of that
track.

Operation variations

Even if the final "seconds" time value is not input,
playback will begin from the selected "minutes"
time after pressing the
ENTER
you press the key, the unit will enter the
READY
playback standby mode at the selected point.
Specifying a track number only
After inputting the track number, press the
or key to begin playback of that track,
TER PLAY
or the key to cue the track and enter play-
READY
back standby mode.
NOTE
Instead of inputting the three-digit track number, you
can input only the desired track number.
Example: To specify track 3, input only "3".
Specifying to the minute
After inputting the three-digit track number and
the number of minutes after the start of the track,
press the or
ENTER PLAY
of that track, or the
READY
and enter playback standby mode.
Example: To specify 1 min 00 sec from the start
of track 2, input "002 001"
NOTE
Following the above example, if "0021" is input, the
same position will be located.
key to start playback.
dial or using the
or key. Or, if
PLAY
EN-
key to begin playback
key to cue the track
1
TASCAM CD-RW900