Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Enerpac XC2202M
Summarization of Contents
1.0 SAFETY
1.1 Hydraulic Safety Precautions
General safety precautions for operating high-pressure hydraulic systems.
1.2 Battery Operated Pump Safety Precautions
Safety guidelines specific to the cordless battery-operated pump.
1.3 Battery First Aid Instructions
Procedures for handling battery fluid exposure incidents.
1.4 Symbols
Explanation of pictorial symbols used to indicate potential hazards.
2.0 COMPLIANCE
2.1 Compliance Statements
Information on product conformity to applicable standards and certifications.
2.2 Electromagnetic Compatibility (EMC)
Details on EMC testing and potential operational interference.
3.0 PRODUCT DATA
3.1 Specifications
Technical specifications including operating parameters, ratings, and dimensions.
3.2 Pressure and Flow
Data on maximum operating pressure and flow rate characteristics.
3.3 Performance Graphs
Visual representations of pump performance curves.
3.4 Reservoir Capacities and Pump Weights
Details on oil reservoir capacity and pump weight for different models.
3.5 Battery and Battery Charger
Information regarding compatible batteries and chargers.
5.0 DESCRIPTION
5.1 Receiving Instructions
Guidance on inspecting components for shipping damage upon arrival.
5.2 Hydraulic Connections
Instructions for connecting hydraulic hoses and fittings to the pump.
6.0 BATTERY
6.1 Charge Level Indicator
Method for checking the battery's current charge level.
6.2 Low Voltage Shutoff
Explanation of the pump's automatic shutdown due to low battery voltage.
6.5 Battery Installation and Removal
Steps for properly installing and removing the battery from the pump.
7.0 OPERATION
7.1 Power Switch
Function and operation of the pump's main power switch.
7.2 Before Start-up
Essential pre-operation checks and setup procedures.
7.3 Operating Precautions
Critical safety warnings for preventing injury during pump operation.
7.4 Operating the Pump Motor
How to control the pump motor using the variable speed trigger.
7.5 Control Valve Operation
Guide to operating the manual 3-way, 2-position control valve.
7.6 Remote Pendant Operation
Instructions for using the optional corded remote pendant controller.
7.8 If Motor Fails To Start (Fault Reset)
Procedure for resetting faults when the pump motor does not start.
7.9 Air Removal
Process to purge air from the hydraulic system for optimal performance.
8.0 MAINTENANCE
8.1 Check Oil Level
Steps for checking the hydraulic oil level in the pump reservoir.
8.2 Hydraulic Oil Requirements
Specifications for the type of hydraulic oil to be used.
8.3 Adding Oil
Procedure for adding hydraulic oil to the pump reservoir.
8.4 Oil Change
Instructions for draining and refilling the hydraulic oil.
8.5 Relief Valve Pressure Adjustment
Guide to adjusting the pump's relief valve pressure setting.
Need help?
Do you have a question about the XC2202M and is the answer not in the manual?
Questions and answers