Loading Batteries; Usage Of Remote Controller; Cautions On Handling Batteries - Marantz SA-11S2 User Manual

BEFORE USING
7

Loading batteries

Before using the remote controller for the first time, load the
batteries in the remote controller. The batteries provided are
used to verify the operations of the remote controller only.
1
Remove the battery cover.
2
Insert the batteries with correct +/– orientation.
3
Close the battery cover until it clicks shut.
7

Cautions on handling batteries

Misuse of the batteries can result in electrolyte leakage,
rupturing, corrosion, etc.
Bear in mind the following points when using batteries.
• Remove the batteries from the remote control unit if the
unit is not going to be used for a prolonged period (a month
or more).
• Do not use an old battery together with a new one.
• Insert the batteries while ensuring that their ª and
· poles are properly aligned with the corresponding
markings on the remote control unit.
• Batteries with the same shape may have different voltages.
Do not use different types of batteries together.
• If electrolyte has leaked, thoroughly wipe the inside of the
battery compartment, and then insert new batteries.
• When batteries which are no longer required are to be
discarded, follow the directions (regulations) laid down
by the local authorities in the area concerned for their
disposal.
6
Two AAA-size (R03) batteries
7

Usage of remote controller

Operational range
Operate the unit with the remote controller within the range of
the illustration below.
Approx.
16.4 ft. (5m)
Remote control unit
Precautions
• Do not allow direct sunlight, an inverter fluorescent
light or other strong source of light to shine onto the
player's infrared signal reception window (remote sensor).
Otherwise, the operation of the remote control unit may be
disabled.
• Bear in mind that operating the remote control unit may
cause other devices operated by infrared rays to be
operated by mistake.
• The remote control unit cannot be operated if the space
between the controller and the player's remote sensor is
obstructed.
• Do not place any objects on top of the remote control unit.
Doing so may cause one or more buttons to be held down
which will cause the batteries to run down.