Operation; Normal Playback - Marantz SA-11S2 User Manual

OPERATION

NORMAL PLAYBACK

7
Super Audio CD player playback
OPEN/
CLOSE
DISPLAY OFF
44.1KHz DISPLAY OFF
88.2KHz
176.4KHz
LOCK
EXT.CLOCK
w, e
q Press POWER switch to turn on.
LCD
The display cycles from TOC Reading → No Disc (when
no disc is loaded) → Super Audio CD (when the start
sound mode setting is Super Audio CD).
w Press the
OPEN/CLOSE
The disc tray comes out. Place the disc with label side up
on the tray.
To play a single (8cm) CD, place the disc with the
indentation at the center of the tray.
e Press
OPEN/CLOSE
r Press
button.
PLAY
Disc type is automatically detected and playback is
started. Track number and track elapsed time(minute,
second) appear on the display.
• For Super Audio CD/CD hybrid-layer discs (See page 3),
the layer that is set in the start sound mode (See page 15)
is played. To change the layer, use the
button. (See page 15)
(Exp.:Track 6, Elapsed time 2 min 8 sec)
Number of current track
Remaining track numbers
Playback automatically stops at the end of the final track.
14
PLAY
STOP
POWER ON/OFF SOUND
MODE
PAUSE
INV.PHASE
q r
button
button.
SOUND MODE
Minutes Seconds
To start playback form the fi rst track
PLAY
Press button.
To stop playback
STOP
Press button.
To eject disc
OPEN/CLOSE
Press button to open the disc tray and take
the disc off. Press the button again to close the tray.
Disc tray must be closed when the unit is not be used.
To pause playback
PAUSE
Press button.
PAUSE indicator will light and playback is paused at the
point that the button is pressed. To restart playback, press
PAUSE
button again or press
To change time display
Press the TIME button on the remote control.
Each time TIME button is pressed, display will change in
the following order. "Track elapsed time" → "Track remaining
time" → "Total remaining time" → "Track elapsed time".
• Track remaining time
(The remaining playing time from the playing point
to the end of the current track)
"–" is displayed
• Total remaining time
(The remaining playing time from the playing point
to the end of the last track)
"–" is displayed
TIME
• If button is pressed when Super Audio CD disc
that supports text is in use, time display is given priority
and the text information will not be displayed afterward. To
see the text information, press
PLAY
button.
"REMAIN" is
displayed
"TOTAL REMAIN"
is displayed
TEXT
button.