Number - RCA CC6151 - VHS-C Camcorder User Manual

JLIP (Joint Level Interface Protocol) Identification
Number
You can connect a device, such as a home computer, to the JLIP
connector on the camcorder.
MENU Dial
(Rotate or
Press In)
JLIP Connector
(Under Cover)
To Select a JLIP ID NO.
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
2. Press the MENU dial in to display the
main MENU in the viewfinder.
.
56
MENU
• MENU END
FOCUS AUTO
EXPOSURE AUTO
DATE/TIME NOV 18.98
TELE MACRO OFF
TAPE LENGTH T30
M.W.B. AUTO
ZOOM SPEED FAST
Rotate the MENU dial to highlight
NEXT. The second MENU will
appear. Keep rotating the MENU dial
to highlight JLIP ID NO.
•BACK
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
DEMO MODE
• MENU END
OFF
OFF
' ON,
07
OFF
.
Press the MENU dial in to display the
JL1P ID NO. menu.
JLIP ID NO.
_84
EXIT
5. Press the MENU dial in to start the ID
NO. (numbers) flashing. Rotate the
MENU dial to select a number from
01 to 99. Press the MENU dial in to
select a JLIP number.
Use the number you select to identify
your camcorder if you connect it to a
computer using the JLIP connector.
6. Rotate the MENU dial to higl_, "ght
EXIT and press the dial in twice to
remove the menus.