Installing Logs - Desa PROPANE GAS LOG HEATER Owner's Operation And Installation Manual

INSTALLING
Continued
102318

INSTALLING LOGS

Failure to position the parts in accordance with these diagrams or
failure to use only parts specifically approved with this heater may
result in property damage or personal injury.
Each log is marked with a number. These numbers will help you identify the log when
installing. It is very important to install these logs exactly as instructed. Do not modify logs.
Only use logs supplied with heater.
1. Place front logs (#1L and #1R) on top of the grate. Make sure the notches in the bottom
of the logs fit over the grate prongs (see Figure 17). Push back of logs flush with metal
grate bar.
Notch
Grate Prongs
Metal Grate Bar
Figure 17 - Installing Front Logs (#1L and #1R)
2. Rest bottom middle log (#2) behind metal posts on front burner. Make sure the grooves in
the bottom of the log fit over the grate. Bring the log forward next to the metal posts. The
pegs on the log must be on top (see Figure 18).
Peg
Groove
Metal Post
Groove
Metal Post
Figure 18 - Installing Bottom Middle Log (#2)
WARNING
Front Log (#1L)
Front Log (#1R)
Bottom Middle Log (#2)
Peg
Grate
19
Continued