Fisher & Paykel OB60N Series Installation Instructions Manual
Fisher & Paykel OB60N Series Installation Instructions Manual

Fisher & Paykel OB60N Series Installation Instructions Manual

Multifunction ovens
Hide thumbs Also See for OB60N Series:

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
MULTIFUNCTION OB60 OVENS
Important!
SAVE THESE INSTRUCTIONS
The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our
local website listed at the end of this document or contact your local Fisher & Paykel dealer.
1
SAFETY AND WARNINGS
WARNING!
Electrical shock hazard
Always disconnect the appliance from
the mains power supply before
carrying out any maintenance or repairs.
Connection to a good earth wiring
system is essential and mandatory.
Alterations to the domestic wiring
system must only be made by a
qualified electrician.
Failure to follow this advice may result
in electrical shock or death.
WARNING!
Fire hazard
Do not use adapters, reducers, or
branching devices to connect this
appliance to the mains power supply.
Failure to follow this advice may result
in overheating, burning, or fire.
Cut hazard
Take care - panel edges are sharp.
Failure to use caution could result in
injury or cuts.
Important safety instructions!
To avoid hazard, follow these instructions carefully
before installing or using this appliance.
Please make this information available to the
person installing the appliance - doing so could
reduce your installation costs.
This appliance must be installed and connected
to the mains power supply only by a suitably
qualified person according to these installation
instructions and in compliance with any applicable
local building and electricity regulations. Failure to
install the appliance correctly could invalidate any
warranty or liability claims.
If the power supply cable is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
NZ AU GB IE
WARNING!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OB60N Series and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety and Warnings
Electrical Shock Hazard
Always disconnect power before maintenance. Qualified electrician required for wiring alterations.
Fire Hazard
Do not use adapters, reducers, or branching devices for mains power connection.
Cut Hazard
Exercise caution as panel edges are sharp to prevent injury or cuts.
Important Safety Instructions
Follow instructions carefully before installing or using. Qualified person required for installation.
Product and Cabinetry Dimensions
OB60S & OB60N Models Dimensions
Provides physical dimensions for OB60S and OB60N oven models.
OB60B & OB60D Models Dimensions
Provides physical dimensions for OB60B and OB60D oven models.
Prior to Installation
Pre-installation Checks
Ensure cavity dimensions, wiring compliance, switch accessibility, and cable length are correct.
Condensation Protection
Recommend moisture-proofing the oven cavity to protect cabinetry from condensation.
Electrical Connection
Connection Requirements
Must be connected by a qualified person, must be earthed, check wiring suitability and voltage.
Model Power and Voltage
Lists power and voltage specifications for OB60S, OB60N, OB60B, and OB60D models.
Securing Oven to Cabinetry
Oven Installation and Fastening
Position oven in cavity, open door, use screws to secure. Do not use silicone or glue.
Final Checklist
Pre-Operation Verification
Confirm level fit, door operation, clear vents, accessible switch, and correct power-on display.
Product and Cabinetry Dimensions (OB90 Models)
OB90 Product Dimensions
Provides physical dimensions for the OB90 oven model.
OB90 Cabinetry Dimensions
Specifies required cabinet dimensions for the OB90 oven model.
Unpacking the Oven
Handling and Weight Warning
Caution: Oven is very heavy. Do not attempt to lift unassisted to avoid serious injury.
Door Removal
Door Detachment Procedure
Step-by-step guide for safely removing the oven door for installation or cleaning.
Electrical Connection (OB90)
OB90 Wiring and Outlet Recommendation
Connect OB90 oven by qualified person. Recommends outlet location in rear corner of cavity.
Hard Wiring the Oven
Terminal Block Cover Plate
Important: Do not unscrew cover plate screws when connecting power supply cable.
Securing Oven to Cabinetry (OB90)
OB90 Oven Mounting
Lift from sides, push into cavity, secure with screws. Avoid damaging trim or sensor.
Refit the Door
Door Reattachment Steps
Guide for reattaching the oven door after installation or servicing.
Final Checklist (OB90)
OB90 Post-Installation Checks
Verify level fit, door operation, vents clear, accessible switch, and perform initial power-on test.
Troubleshooting
Common Installation Issues
Check circuit breaker, electrical connections, power supply, and voltage if appliance is not functioning.

Table of Contents