Table of Contents
Advertisement
12. Disconnect the earth strap from the chassis.
17. Disconnect the clutch operating cylinder
and hang up with line connected.
13. Undo the heating hoses at the heat exchan-
gers and pull off.
Note
The clutch must never be operated if the cylin-
der has been removed.
14. Remove rear anti-roll bar.
10009
18. Undo the fillister head screws connecting
the halfshaft flange to the differential.
15. Undo the connecting lines (3) at the
starter.
16. Remove the safety strap and disengage the
accelerator tie rod. Unclip the line for the
clutch operating cylinder.
19. Position trolley jack with engine mounting
plate at the gravity center of the
engine/gearbox
assembly and raise jack
until slightly pretensioned.
Note
Make sure that the mounting plate is in the
correct position. Lock the lever in horizontal
position.
86/935
Hide quick links:
Advertisement
Table of Contents
