Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fast A18
Summary of Contents for Fast A18
- Page 1 A10 / A13 / A18 / A24 - 30' / 40' LIQUID FERTILIZER APPLICATOR OWNERS MANUAL...
- Page 2 820049 A10 / A13 / A18 / A24 - 30' / 40' Liquid Fertilizer Applicator 2023-09-20...
-
Page 3: Table Of Contents
Observe Maximum Transport Speed ........................23 EC Compliance Notification ..........................24 Use a Signal Person ............................. 24 Use a Safety Chain ............................... 24 Tow Loads Safely ..............................24 Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 3... - Page 4 Check Track Alignment ............................45 Track Alignment Procedure ..........................46 ATTACHING and DETACHING ..........................47 Attach the Machine Safely ............................47 Attach the Machine to the Tractor .......................... 47 Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 4...
- Page 5 Clean Strainer Filter ..............................62 FILLING THE TANK ..............................63 Filling the Product Tank ............................63 Filling Fresh Water Rinse Tank ..........................63 Use Tank Fill Marker ..............................64 Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 5...
- Page 6 Face Seal Straight Stud End O-Ring Installation ....................75 Fitting Installation ............................... 75 Assembly Torque ..............................75 SAE Face Seal and O-Ring Stud End Fitting Torque Chart ..................76 Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 6...
- Page 7 This warranty shall expire one (1) year after the date of delivery of the new machinery. If these conditions are fulfilled, Fast Ag Solutions shall at its own cost and at its own option either repair or replace any defective parts provided that the buyer shall be responsible for all expenses incurred as a result of repairs, labor, parts, transportation or any other work, unless Fast Ag Solutions has authorized such expenses in advance.
-
Page 8: Warranty Registration
The above equipment and Operator’s Manual have been received by me, and I have been thoroughly instructed as to care, adjustments, safe operation, and applicable warranty policy. Date_____________________ Owner’s Signature________________________________________________________ White - FAST Yellow - Dealer Pink – Customer Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 8... - Page 9 FAST A10 / A13 / A18 / A24 Series Applicator APPLICATOR SERIAL NUMBER _______________________________ DATE PURCHASED ______________/_____/__________ TANK SIZE (Gal.) (CIRCLE ONE) 1050 1350 1800 2400 NUMBER OF ROW UNITS ___________________________________ PUMP MANUFACTURER: (CIRCLE ONE) ACE FMC-150F-HYD-206 ACE FMC-205F-HYD-304 ACE FMC-205F-HYD-304 PWM...
-
Page 10: Inspections
Transport pins are inserted in the transport holes. This machine has been thoroughly checked and to the best of my knowledge is ready for delivery to the customer. Signed: _________________________ Date: _________________________ Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 10... -
Page 11: Delivery
To the best of my knowledge, this machine has been delivered ready for field use, and the customer has been fully informed as to its proper care and operation. Signed: _________________________ Date: ________________________ Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 11... -
Page 12: After-Sale
Ask the customer if recommended periodic lubrication has been performed. o Review the Operator's Manual with the customer and stress the importance of proper lubrication and safety precautions. Signed: _________________________ Date: _________________________ Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 12... -
Page 13: Owner Register
Model Number P.I.N. Number Name Address County State Date Purchased Name Address County State Date Purchased Name Address County State Date Purchased Name Address County State Date Purchased Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 13... -
Page 14: Foreword To The Owner
(“Intended Use”). Use in any other way is considered as contrary to the Intended Use. The manufacturer accepts Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 14... - Page 15 TIRE MANUFACTURER'S warranty applicable to your machine may not apply outside U.S. If you are not the original owner of this machine, it is in your interest to contact your local Fast Ag Solutions dealer to inform them of this unit's serial number. This will help Fast Ag Solutions notify you of any issues or product improvements.
-
Page 16: Introduction
Fast Ag Solutions will back its products where defects appear within the warranty period. Should the equipment be abused or modified to change its performance beyond original factory specifications, warranty will become void. INTRODUCTION Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 16... -
Page 17: Safety
The term IMPORTANT is used to Manual and need assistance, contact your indicate that failure to observe the hazard Fast Ag Solutions dealer. can cause damage to the equipment. SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 17... -
Page 18: General Safety
Disengage all power and operate controls to relieve pressure. Lower equipment to the ground. Stop the engine. Remove the key. Allow machine to cool. Securely support any SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 18... -
Page 19: Support Raised Equipment
Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 19... -
Page 20: Inspect Lift Circuit Hoses
Securely store attachments and implements stand to one side and NOT in front of or over SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 20... -
Page 21: Dispose Of Waste Properly
Avoid inhaling vapor, aerosol, or dust. Always have soap, water, and a towel available when working with chemicals. If a chemical contacts skin, hands, or face, wash SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 21... -
Page 22: Handle Chemical Products Safely
A Material Safety Data Sheet (M/SDS) provides specific details chemical Tow the machine behind a properly equipped products: physical and health hazards, tractor only. safety procedures, and emergency response techniques. SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 22... -
Page 23: Use Safety Lights And Devices
Use additional caution and reduce speed when towing under adverse surface conditions, when turning, and when on inclines. For transport, the weight of the SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 23... -
Page 24: Ec Compliance Notification
If towed equipment does not have brakes, do Prior to starting the tractor, discuss hand not travel more than 32 km/h (20 mph) and signals and what each signal means to avoid SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 24... -
Page 25: Avoid Overhead Power Lines
Use a tractor large enough to maintain control. Properly ballast tractor for towing your machine. Refer to tractor Operator’s Manual and this Manual to ensure that SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 25... -
Page 26: Transport Safely
IMPORTANT: When transporting the machine on a roadway, ALWAYS USE appropriate lamps and devices for adequate warning to operators of other vehicles. Refer to Use Safety Lights and Devices. SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 26... -
Page 27: Replace Safety Signs
Replace missing or damaged safety signs. Use this Operator’s Manual for correct safety sign placement. There can be additional safety information contained on parts and components sourced from suppliers that is not reproduced in this Operator's Manual. Hitch Hitch SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 27... -
Page 28: Wing
SAFETY Wing Wing SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 28... -
Page 29: Main Frame
SAFETY Main Frame Wheel and Tracks SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 29... -
Page 30: Safety Features
The customer is responsible for understanding and complying with all local, regional, and national requirements regarding roadway transport. SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 30... -
Page 31: Sign-Off Form
SAFETY Sign-Off Form Fast Ag Solutions follows the general Safety Standards specified by the American Society of Agricultural Engineers (ASAE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operating and/or maintaining the FAST Liquid Fertilizer Applicator must read and clearly understand ALL Safety, Operating, and Maintenance information presented in this Manual. -
Page 32: Specifications
20,684 kPa (206.8 bar) Wing Fold Valve Block 55 LPM (15 GPM) (3000 psi) 20,684 kPa (206.8 bar) Product Pump Drive Motor 61 LPM (16 GPM) (3000 psi) SPECIFICATIONS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 32... -
Page 33: Machine Dimensions & Specifications
Tank size 6814 L (1800 Gal.) 9085 L (2400 Gal.) Quick-Fill Size 76mm (3in.) Delivery Type Injection Standard Hydraulic Pump ACE FMC-150F-HYD-206 Hydraulic Down Pressure Hydraulic Wing Kick SPECIFICATIONS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 33... -
Page 34: Preparing The Machine
Remove all entangled material. Raise the toolbar and turn the metering pump slightly. Check that there is liquid coming out at each application site. Unplug or connect lines as required. Replace any plugged nozzles or tubes. PREPARING THE MACHINE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 34... -
Page 35: Axles, Tires, And Tracks
3/4” bolts to 271 N-m (200 ft-lbs.). Repeat for the other side. Remove the axle bolts (F) and slide the axles (B) out of shipping holes (C). AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 35... -
Page 36: Axle Width Chart - Singles
AXLES, TIRES, and TRACKS Axle Width Chart – Singles AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 36... -
Page 37: Axle Width Chart - Duals
AXLES, TIRES, and TRACKS Axle Width Chart – Duals AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 37... -
Page 38: Axle Width Chart - Tracks
AXLES, TIRES, and TRACKS Axle Width Chart – Tracks AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 38... -
Page 39: Checking Tire Pressure
NOTE: Tire pressure is directly linked to its Load Rating (LR###). Make sure of the load rating of the tire before adding any air to the tire. AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 39... -
Page 40: Checking Wheel Nuts
Tighten all wheel bolts to specification. Item Specification (A) Main Frame Wheel Nut 359 N-m (265 ft-lbs.) (B) Gauge Wheel Nut 95 N-m (70 ft-lbs.) AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 40... -
Page 41: Track Use
Avoid roading at high speeds with a new set of tracks or wheels, especially during first 50-100 operating hours. Damage to drive lugs and wheels may result. AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 41... - Page 42 After the initial 100-hour break-in and alignment, a long-term break-in process (up to 400 hours) will likely occur. During this period, maximize the exposure of tracks to soft soil and minimize high speed, heavily loaded transport operation. AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 42...
-
Page 43: Track Wear & Trash Buildup
Inspect for loose, damaged, or missing parts. Repair or replace parts before entering the field. 1. Remove any debris or material buildup on the tops of frame reaction arms. Buildup can wear down rubber on wheels. AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 43... -
Page 44: Track Service
3. Look over mid rollers and idler wheels for visible cracks around the bolt pattern or the rim. If seen, contact your Fast Ag Solutions dealer for the best recommendation of repair or replacement. -
Page 45: Check Track Alignment
5. If the shim fits freely between the lugs and mid-roller on both sides of the undercarriage, the alignment is correct. It the shim binds and does not fit between the mid-rollers / guide lugs, track adjustment is necessary. AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 45... -
Page 46: Track Alignment Procedure
5. When alignment is complete, reinstall the lock plates and tighten cap screws to their required torque specification of 130 N-m (95 ft-lbs.). AXLES, TIRES, and TRACKS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 46... -
Page 47: Attaching And Detaching
Hydraulic System Requirements. Change the choice of Applicator model if required. Do not operate unless tractor and applicator hydraulics are compatible. 6. Connect Hydraulics ATTACHING and DETACHING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 47... -
Page 48: Attach Safety Chain To Tractor
Always replace a safety chain if one or more links or end fittings are broken, stretched, or otherwise damaged. ATTACHING and DETACHING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 48... -
Page 49: Make Proper Hose Connections
IMPORTANT: All hydraulic couplers must be clear of debris, dust, and sand. Use protective caps on fluid openings until ready make connection. Foreign material damage the hydraulic system. ATTACHING and DETACHING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 49... -
Page 50: Scv Identification Chart
Product Pump Return Pressure Product Pump Pressure Return Pressure Return Pressure IMPORTANT: Hose colors do not match SCV color Hydraulic System Requirements for system compatibility. ATTACHING and DETACHING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 50... -
Page 51: Detach Machine From Tractor
4. Tighten the hex bolts to 873 N-m (644 pressure before disconnecting ft-lbs.) hydraulic hoses. 3. Disconnect hydraulic hoses and place them in their storage position. ATTACHING and DETACHING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 51... -
Page 52: Transporting
Travel at a reasonable and safe speed; transport cylinder locks on both main REDUCE speed over rough or uneven lift cylinders. terrain, slopes, and when turning. See Observe Maximum Transport Speed. TRANSPORTING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 52... -
Page 53: Transport Notes And Checks
Riders obstruct the Operator’s view resulting in the machine being operated in an unsafe manner. TRANSPORTING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 53... -
Page 54: Caution For All Machines
Wings will be laterally in- wings on you or others. line with the center section when fully unfolded. TRANSPORTING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 54... - Page 55 11. Pull SCV I backward to fully raise toolbar and kick wings up. 12. Toolbar is now ready for field application. D. Gauge E. Knob F. Lock Ring G. Down Pressure Valve TRANSPORTING Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 55...
-
Page 56: Hydraulic Flow
5. Adjust “Rabbit/Turtle” flow control valves if equipped. and agitation valve(s) to get desired 4. Adjust tractor flow control to minimum injection pressure. flow setting (Turtle). HYDRAULIC FLOW Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 56... -
Page 57: Open Center System (Open)
Figure 8: SCVI Pulled Backward When the tractor’s SCV I is pulled backward, the following functions are enabled: 1. Raises main lift, 2. Raises wings, and 3. Raises wing kicks. HYDRAULIC FLOW Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 57... - Page 58 1. Turns off hydraulic block pressure. Figure 11: SCV III Pushed Forward When the tractor’s SCV III is pushed forward, the following functions are enabled: 1. Engages product pump for applying. HYDRAULIC FLOW Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 58...
-
Page 59: Adjust Depth Control
Install spacers (A) on the toolbar lift cylinders’ ram to give the required machine depth. The toolbar can then be fully lowered and always return to the same depth. ADJUST DEPTH CONTROL Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 59... -
Page 60: Adjust Ground Speed
Machine bouncing will prevent this required consistency. Inspect Coulters Figure 13: Coulter with Injector Figure 14: Coulter with Knife ADJUST GROUND SPEED Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 60... -
Page 61: Adjust Nozzles
This will ensure that liquid enters the soil via a furrow and is retained in the soil as the furrow closes. ADJUST NOZZLES Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 61... -
Page 62: Preparing The Liquid System
6. Install the screen in the canister and tighten by hand. 7. Open the sump valve if there is liquid in the tank. PREPARING THE LIQUID SYSTEM Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 62... -
Page 63: Filling The Tank
CAUTION: Add only the amount of other contaminates. liquid to the tank that is required for the job. 1. Position a tender truck or a drive truck next to machine. FILLING THE TANK Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 63... -
Page 64: Use Tank Fill Marker
Pump & Pressure The Metering Pump (product pump, main pump) is located on the left side in front of the trailer’s tire. FILLING THE TANK Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 64... -
Page 65: Lubrication And Maintenance
The temperature limits and service intervals Make certain all containers are properly shown in this Manual apply to both marked to identify their contents. conventional and synthetic lubricants. LUBRICATION and MAINTENANCE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 65... -
Page 66: Lubrication And Maintenance Intervals
Perform each lubrication service illustrated in this section. • Grease the Toolbar Parallel Linkages (both sides) • Grease the Inner Wing Lift Pins (both sides) LUBRICATION and MAINTENANCE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 66... -
Page 67: Each 50 Hours Or Weekly
Grease the Inner Wing Fold Pins (both sides) • Grease the Row Units’ Actuation Points • Grease the Flip Wing Fold Hinge (both sides) • Grease the Gauge Wheels LUBRICATION and MAINTENANCE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 67... -
Page 68: Before And After Each Season
Top Cover and Jack. As Required Grease and lubricate the Mid Wheel, Wedges, Idler, and Mid-Roller Cap Screws with general-purpose grease at hourly interval indicated on their decal(s). LUBRICATION and MAINTENANCE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 68... -
Page 69: Service
On towed implements, disconnect its wiring electrical shorts and entanglement in moving harnesses from the tractor before servicing parts. any electrical system components or welding on the machine. SERVICE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 69... -
Page 70: Support The Machine Properly
A - Piston Replace worn or damaged hose assemblies A. Piston immediately with Fast Ag Solutions approved B. Rod Guide or Gland replacement parts. SERVICE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 70... -
Page 71: Replace Hydraulic Hoses
(827 bar) (12,000 psi) burst pressure according to SAE Standard J517, 100R17 hose specification. Incorrect hose length or routing can increase the chance of hose wear or damage. Use the SERVICE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 71... -
Page 72: Preparing For Storage
Replace any line that is cut, nicked, or abraded. 10. Touch paint nicks scratches to prevent rusting. 11. Fold inner and outer wings to the transport configuration. PREPARING FOR STORAGE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 72... -
Page 73: Tightening Hardware
M20 and larger fasteners with JDM F13C, F13F or F13J zinc flake coating. “Dry” means plain or zinc plated without any lubrication, or M6 to M18 fasteners with JDM F13B, F13E or F13H zinc flake coating. TIGHTENING HARDWARE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 73... -
Page 74: Unified Inch Bolt And Screw Torque Values
7/8 in. and larger fasteners with JDM F13C, F13F or F13J zinc flake coating. “Dry” means plain or zinc plated without any lubrication, or 1/4 to 3/4 in. fasteners with JDM F13B, F13E or F13H zinc flake coating. TIGHTENING HARDWARE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 74... -
Page 75: Face Seal Fittings Assembly & Installation - All Pressure Applications
B. Bulkhead Union and Bulkhead Lock H. Swivel Nut Lock Nut C. 90° Swivel Elbow and Tube Nut D. 90° Adjustable Stud Elbow E. Port Plug F. Stud End TIGHTENING HARDWARE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 75... -
Page 76: Sae Face Seal And O-Ring Stud End Fitting Torque Chart
The straight hex wrench sizes listed apply to connectors only and may not be the same as the corresponding plug of the same thread size. These torques were established using steel plated connectors in aluminum and brass. TIGHTENING HARDWARE Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 76... - Page 77 Fast Ag Solutions 4130 Commerce Boulevard Windom, MN 56101 1-800-772-9279 Toll Free 1-507-427-3861 Voice 1-507-427-3030 Fax https://fastagsolutions.com/ 820049 Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 77...
Need help?
Do you have a question about the A18 and is the answer not in the manual?
Questions and answers