Use Caller Id To Automatically Set Date And Time - AT&T CL84100 User Manual

Telephone settings
Handset settings
6. Press qCID or pDIR to select the day then press
/SELECT, or enter the number using the dial pad keys.
MENU
7. Press qCID or pDIR to select the year then press
/SELECT, or enter the number using the dial pad keys,
MENU
then press
MENU
8. Press qCID or pDIR to select the hour then press
/SELECT, or enter the number using the dial pad keys.
MENU
9. Press qCID or pDIR to select the minute then press
/SELECT, or enter the number using the dial pad keys.
MENU
10. Press qCID or pDIR to select AM or PM, then press
/SELECT to confirm. There is a confirmation tone.
MENU
Press OFF/
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and
day not set," before it plays the message.

Use caller ID to automatically set date and time

You can choose if the date and time are automatically set by incoming
caller ID. The default setting is On.
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press qCID or pDIR to scroll to >Settings, then press
/SELECT.
MENU
3. Press qCID or pDIR to scroll to >Set date/time, then
press /SELECT.
MENU
4. Press qCID or pDIR to scroll to >CID time sync, then
press /SELECT.
MENU
5. Press qCID or pDIR to select On or Off, then press
/SELECT to confirm. There is a confirmation tone.
MENU
/SELECT to confirm.
to cancel.
CLEAR
SELECT
16
SET DATE
--/--/--
SET TIME
--:-- --
to
Settings
>
Website
Date & time
>CID time sync
CID TIME SYNC
On
>