Related Manuals for Bosch MIC-7522-Z30WR
Summarization of Contents
Safety
About this Manual
Explains the purpose and scope of the installation manual for the camera.
Legal Information
Covers copyright and trademark notices pertaining to the manual and product.
Safety Precautions
Details symbols and notations used in the manual to highlight potential hazards and important information.
Important Safety Instructions
Provides critical safety guidelines for installation, wiring, and operation to prevent hazards.
Important Notices
Lists general important notices for installation, including grounding, ESD precautions, and environmental considerations.
Important Notices - Illumination Safety
Addresses photobiological safety related to the optional illuminator accessory, detailing risk groups and exposure limits.
Use latest software
Emphasizes the importance of using the latest software version for optimal functionality, performance, and security.
Customer Support and Service
Provides contact information for technical support, customer service, and general inquiries.
Introduction
Parts List - Camera
Lists all components included with the MIC camera package for installation and setup.
Additional Products Required
Details essential external products and accessories needed for camera installation and operation.
Additional Tools
Lists necessary tools required for the installation and configuration of the camera.
Establishing the connection
Guides on how to connect the camera to the network and establish initial communication.
Password protection in camera
Explains the process of setting a strong service-level password for camera security during initial setup.
Mounting
Mounting Location and Orientation Options
Discusses suitable locations and different mounting orientations for the camera, including upright and inverted.
Mounting Options
Illustrates correct and incorrect mounting orientations for MIC cameras, detailing upright, inverted, and canted positions.
Mounting Bracket Options
Describes various mounting brackets available for different installation configurations and hardware recommendations.
Considerations for Mounting the Camera in Inverted Orientation
Outlines the specific steps and considerations for orienting and installing the camera in an inverted position.
Configuration Programming
Configuration Programming in the Shipping Box
Explains how to connect and configure the camera while it is still in its original packaging.
Configuration Programming on a Temporary Table-top Stand
Describes how to set up and configure the camera using its foam packaging as a temporary stand.
Optional Accessories Installation
(Optional) Installing a Sunshield
Guides on how to attach a sunshield accessory to the camera head for protection from direct sunlight.
(Optional) Installing the Illuminator
Provides instructions for installing the optional IR illuminator accessory to enhance low-light video performance.
Connection
About Camera Power and Control
Describes the camera's network video server capabilities for PTZ control and video transmission over IP networks.
Power Source Options
Details the available power options, including High PoE midspans and 24 VAC power supplies for the camera.
Ethernet Connections
Specifies the requirements for Ethernet cabling, including type, distance, and connectors, for network connectivity.
Camera Connections
Illustrates the electrical and data connections made at the camera base, detailing wire colors and connector types.
Connect the Camera to the Network
Provides step-by-step instructions for physically connecting the camera to the network using midspan or direct LAN connection.
Typical System Configurations
Typical IP Configuration with High PoE midspan (no I/O connections)
Shows a typical network setup using a High PoE midspan for camera power and data transmission.
Typical Configuration with MIC-ALM-WAS-24
Illustrates a system configuration incorporating the MIC Alarm-Washer Box for enhanced functionality.
Troubleshooting
Physical reset button
Explains how to use the hardware reset button to restore the camera to factory default settings.
Maintenance
Replacing a wiper assembly
Provides detailed steps for replacing the camera's wiper assembly to ensure clear visibility.
Decommissioning
Disposal
Instructs on the proper environmental disposal of the electronic equipment according to regulations.
Need help?
Do you have a question about the MIC-7522-Z30WR and is the answer not in the manual?
Questions and answers