Advertisement

MIC IP ultra 7100i │ MIC IP starlight 7100i
MIC‑7504‑Z12BR│MIC‑7504‑Z120WR│MIC‑7504‑Z12GR│MIC‑752
2‑Z30B│MIC‑7522‑Z30W│MIC‑7522‑Z30G│MIC‑7522‑Z30BR│MIC
‑7522‑Z30WR│MIC‑7522‑Z30GR
en
Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIC-7522-Z30BR and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Information
About this Manual
Manual compilation, verification, and potential changes.
Legal Information
Copyright and trademark details for the manual and product.
Safety Precautions
Explains danger, warning, and caution symbols used in the manual.
Important Safety Instructions
Crucial safety instructions for installation, electrical, and environmental considerations.
Important Notices
Covers product use, ESD, grounding, heat sources, and outdoor signal installation.
Illumination Safety Notices
Details photobiological safety standards and exposure limits for optional illuminators.
Use Latest Software
Emphasizes using and updating software for optimal performance and security.
Customer Support and Service
Contact information for customer support and service across different regions.
Introduction to MIC Cameras
Camera Parts List
Lists the components included with the MIC IP ultra 7100i/starlight 7100i camera.
Additional Products Required
Lists external products and accessories needed for camera installation and operation.
Additional Tools
Lists required tools for camera setup and network connection.
Establishing Network Connection
Details steps for establishing network connectivity and IP address configuration.
Camera Password Protection
Explains setting and using a strong service-level password for camera security.
Mounting the MIC Camera
Mounting Location and Orientation Options
Discusses options for selecting mounting locations and camera orientations (upright, inverted, canted).
Mounting Options
Illustrates correct and incorrect mounting orientations for MIC cameras (upright, inverted, canted).
Mounting Bracket Options
Describes available mounting brackets, hardware, and specific types like wall and pole mounts.
Inverted Orientation Mounting
Provides step-by-step instructions for configuring the camera orientation to 'Inverted'.
Outdoor Camera Installation
Grounding the Parapet Mount
Provides detailed steps for grounding a parapet mount, including conduit and wire connections.
Optional Camera Configurations
Installing an SD Card
Guides on how to install a standard SD card into the rear of the camera head.
Configuration Programming in Shipping Box
Explains how to configure the camera while it is still in its original packaging.
Configuration Programming on Table-top Stand
Provides steps for initial network connection and configuration using a temporary stand.
Installing Camera on Hinged DCA
Details the process of installing a MIC camera onto a Hinged DCA, including parts and tools.
Installing a Sunshield
Guides on how to install a sunshield onto the camera head, including parts and tools.
Installing the Illuminator
Provides instructions for installing the MIC illuminator accessory, including safety and parts.
Canting the Camera
Explains how to adjust the camera's position to a 35° canted angle for a wider field of view.
Camera Connection and System Setup
Camera Power and Control
Describes the camera's network video server for encoding video and PTZ control over IP networks.
Power Source Options
Details power options including High PoE midspan and 24 VAC, and their simultaneous use.
Ethernet Connections
Specifies requirements for Ethernet cables, distance, and PoE connections for network setup.
Camera Connections
Illustrates and describes electrical and data connections from the camera's connectors.
Connect Camera to Network
Provides instructions for connecting the camera to the network using a midspan or directly.
Typical System Configurations
IP Configuration with High PoE Midspan
Illustrates a typical IP system setup using a MIC camera and a High PoE midspan.
Configuration with MIC-ALM-WAS-24
Shows a system configuration involving a MIC camera, DCA, and the MIC Alarm-Washer Box.
Troubleshooting and Maintenance
Troubleshooting Issues
Identifies common camera issues like reboots and provides initial resolution steps.
Physical Reset Button
Explains when and how to use the physical reset button to restore factory defaults.
Replacing Wiper Assembly
Provides initial steps and precautions for replacing the camera's wiper assembly.
Decommissioning and Data
Transfer
Notes that the device should be passed on with its installation manual.
Disposal
Provides guidelines for environmentally compatible disposal of electronic equipment.
Technical Data and Support
Technical Data
Directs users to the datasheet for product specifications available on the Bosch website.
Support Services
Provides a link to access support services for Bosch products online.
Bosch Building Technologies Academy
Offers access to training courses, video tutorials, and documents via the Academy website.

Table of Contents

Save PDF